Auctions & Liquidations Surplus Assets of MidAtlantic Minerals

Timed Online Auction

We are pleased to announce that TCL Asset Group Inc. will be offering for sale by online auction a complete "40 Ton/hour Process Plant" used to crush, process and bag quartz, limestone and dolomite. 

Prior to auctions sale, we are accepting offers on major assets. To submit an offer please email Terrance Jacobs at tjacobs@managingyourassets.com.

Bidding Closes: Wednesday, July 24 at 10:00 AM ET

Inspection: Friday, July 19 - By Appointment Only - Please contact 905-660-1367

Preliminary Catalog Now Posted! Complete list coming soon! Click here to register for the auction sale.

MAJOR ASSETS INCLUDE:

PRIMARY CRUSHING EQUIPMENT

• Complete Cederapid Jaw Crusher System, S/N 25537, incld. Jaw Crusher 10 X 36, 8 MT feed hopper, 2 deck screen, screen 3 ft. x 5 ft., w/ 40hp motor with soft start, conveyor to feed screen 3 ft. wide x 5 ft. long,  recirculating system, spare parts, fully automated via remote control, can make any rock between 1 in. to 4 in. fully rebuilt in 2023
• SOLD Cemco VSI Crusher, model Superchipper 54, w/ 150hp electrical drive and remote control motor, rock shelf kit, anvil kit, 27 in. rotor with 4 port, 75hp lube oil system/reservoir and filter protection, vibration switch, 115 volts ac, 125 TPH capacity, 5 in. max feed, oil cooler, 3 phase, 600 volts, 1/4hp forced air 6-25 GP, spare parts rotor liner, 150hp WEG spare motor, housing and table
• SOLD Cederapids Jaw Crusher, S/N 20220, incld. Jaw Crusher approx. 10 in. x 24 in., w/hopper approx. 12 ft. x 10 ft., able to receive 7-8 tons, diesel engine, electrical motor with variable speed feeder to feed crusher, single pass screen approx. 2ft. wide x 6 ft. long and recirculating system to recirculate crushed material (well maintained and ready to work)

SEPARATION & FILTRATION EQUIPMENT

• SOLD Midwestern 3 Screen Unit, model MEV 5 X 10, incld. 5 deck of 5 ft. wide x 10 ft. long with silicone balls to clean screen panel, steel structure, feed discharge and 4 spare bearing housing, w/Toshiba 10hp motor
• Complete Triple Deck Magnetic Roll Separator, model D11015-3, S/N RMS3.11.15, overall dims. 2350 MM X 1550 MM X 2400 MM, 14000 GAUSS of 110 DIA X 1500 mm, vibrofeeder with speed control able to handle 0 to 6 metric tons per hr of quartz sand 0.1 MM-0.7 MM at 200 deg. F, w/ control panel, Siemens motor, 600 volts, 60 Hz   
• Eriez Magnetic Drum, model SS-RE(HT)-HF, S/N 228680 1/2, approx. 12 in. diameter x 24 in. width, 11ga stainless steel drum shell with wiper bar and cast aluminum end flanges, complete with sealed for life ball bearing, high temperature magnetic circuit suitable for material temperature up to 250 deg. F, drum equipped with a two-piece, replaceable 304SS wear wrap, w/infeed hopper with adjustable discharge gate, adjustable splitter, inspection access panels and baldor 1/3 hp gear motor and drive (2015)
• Eriez Magnetic Drum, model DIH HFP 18 X 48, S/N To51359o, approx. 18 in. diameter x 48 in. width, 11ga stainless steel drum shell with wiper bar and cast aluminum end flanges, complete with a sealed for life bearing, high temperature circuit up to 250 deg. F, drum equipped with a two-piece replaceable 304SS wear wrap, w/infeed hopper with adjustable discharge, 3/4 hp motor 

ROLLING STOCK - SURFACE ASSETS

• Komatsu Crawler Excavator, model PC200, 8915.2 hours
• Komatsu Wheel Loader, model WA320-3, 13669.4 hours
• Komatsu Wheel Loader, model WA380-6, 17351.1 hours
• Atelier Usinage Carrignan Mobile Rail Car Platform, 20,000 lbs. capacity
• Atelier Usinage Carrignan Mobile Truck Ramp Platform, 20,000 lbs. capactiy
• Sea Container 40ft.

MECHANICAL HANDLING EQUIPMENT-BELT & SCREW CONVEYORS

• C1 Outside-Belt Conveyor, 100 ft. long x 24 in. width belt, incld. TxT625CT Dodge gearbox, Brook Hansen motor 20hp, 600 volts, vulcanized belt joint, belt 3 ply, 330, 1/4 x 1/16, w/hopper 9 ft. x 12 ft. w/grizzly, skirting on hopper only, anti-sticky Luff anti-sticky return iddler, 35 deg. hidler and Flexco Eliminator P-type belt cleaner
• CF-1-MGR Belt Conveyor, approx. 20 ft. 2 in. long x 24 in. width belt, 3 ply, 1/4-1/16, incld. TXT525BT dodge gearbox, dodge bearing, Brook Hansen motor 15 hp, 600 volts, w/ vulcanized belt joint, conveyor support attach on equipment, abrasive green resistant rubber skirting, Strongco 20 deg. hilder, anti-sticky luff return iddler and Martin Pit Viper belt cleaner, fully enclosed (2015) 
• SOLD C-1-MGR Belt Conveyor, approx.10 ft. long x 24 in. width belt, high temp belt 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, dodge bearing, Brook Hansen motor 7.5 hp, 600 volts, w/ mechanical belt joint, conveyor support attach on top, abrasion resistant green skirting, Strongco 20 deg. hilder, and Martin Pit Viper belt cleaner, fully enclosed (2015)
• SOLD C-2-MGR Belt Conveyor, approx. 26 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TA2115A dodge gearbox, dodge bearing, Cantoni motor 5 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler,  and Martin Pit Viper belt cleaner, fully enclosed
• SOLD C-3-MGR Belt Conveyor, approx. 29 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TA2115H dodge gearbox, dodge bearing, Cantoni motor 5 hp, 600 volts, w/ mechanical belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler,  and Martin Pit Viper belt cleaner, fully enclosed
• SOLD C-4-MGR Belt Conveyor, approx. 27 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, dodge bearing, Brook Hansen motor 10 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder,Strongco regular return iddler, anti-sticky luff, and Martin Pit Viper belt cleaner, fully enclosed
• C-5-MGR Belt Conveyor, approx. 21 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT525BT dodge gearbox, Brook Hansen motor 15 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder, anti-sticky luff, and Martin belt cleaner, fully enclosed
• SOLD C-10-MGR Belt Conveyor, approx. 25 ft. long x 24 in. width belt, high temp belt 220, 2 ply, 3/16 x 1/16, incld. TXT425AT dodge gearbox, Brook Hansen motor 7.5 hp, 600 volts, w/ vulcanized belt joint, support legs, abrasion resistant green skirting, Strongco 20 deg. hilder, anti-sticky luff, and Martin Pit Viper belt cleaner, fully enclosed
• SC-2-Screw Conveyor, approx. 16 in. screw diameter x 30 ft. long conveyor, w/dodge TA3203H25 gearbox, dodge bearing, Brook Hansen 10 hp, 600 volt motor, flight spec. 1/4 thick steel
• SC-6-Screw Conveyor, approx. 16 in. screw diameter x 16 ft. 3 in. long conveyor, w/dodge bearing, flight spec. 1/4 thick steel
• SC-9-Screw Conveyor, approx. 16 in. screw diameter x 25 ft. long conveyor, w/dodge TA3203H25 gearbox, dodge bearing, Epact-HPE 7.5 hp, 600 volt motor, flight spec. 1/4 thick steel
• SC-10-Screw Conveyor, approx. 16 in. screw diameter x 19 ft. long conveyor, w/dodge TXT424AT gearbox, dodge bearing, Brook Hansen 7.5 hp, 600 volt motor, flight spec. 1/4 thick steel
• SC-12-Screw Conveyor, approx. 9 in. screw diameter x 13 ft. long conveyor, w/dodge size 2 gearbox, sealmaster bearing, Epact-HPE 2 hp, 600 volt motor, flight spec. 3/16 thick steel
• SC-13-Screw Conveyor, approx. 9 in. screw diameter x 10 ft. long conveyor, w/speedtronics SPTXT225TXMFPP gearbox, dodge bearing, Epact-HPE 2 hp, 600 volt motor, flight spec. 3/16 thick steel
• SC-15-Screw Conveyor, approx. 9 in. screw diameter x 10 ft. long conveyor, w/dodge AD225 gearbox, dodge bearing, Brook Hansen 2 hp, 600 volt motor, flight spec. 3/16 thick steel

MECHANICAL HANDLING EQUIPMENT-BUCKET ELEVATORS & STACKER CONVEYORS

• SOLD BE-2-Strongco Centrifugal Discharge Belt Bucket Elevator, model CLB-4, approx. 16 belt width, 33 ft. discharge height, Strongco thick mild steel bucket with ar lip, w/ dodge TXT625T gearbox, dodge bearing, Brook Hansen 15 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
• SOLD BE-3-Strongco Centrifugal Discharge Belt Bucket Elevator, model CLB-4, approx. 16 belt width, 68 ft. 8 in. discharge height, Strongco thick mild steel bucket with ar lip, w/ dodge TXT625T gearbox, dodge bearing, Brook Hansen 20 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
• SOLD BE-4-Thomas Conveyor Bucket Elevator, approx. 14 belt width, 37 ft. 6 in. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA4207H40 gearbox, dodge bearing, WEG 10 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
• SOLD BE-5/BE-6/BE-7/BE-8-Thomas Conveyor Bucket Elevator, approx. 9 belt width, 18 ft. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA0107L31 gearbox, dodge bearing, WEG 1,5 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
• BE-9-Thomas Conveyor Bucket Elevator, approx. 14 belt width, 15 ft. 8 in. discharge height, Tapco thick mild steel bucket with ar lip, w/ dodge TA3203H32 gearbox, dodge bearing, WEG 7,5 hp, 600 volt motor and mechanical belt joint, belt spec. Solarshield Extrem 375/3-1/4 x 1/6
• Willis Pit Portable Transfer Conveyor, Stacker, approx. 24 in. width belt x 50 ft. long, w/ WEG 10 hp, 600 volt motor, dodge bearing, vulcanized belt joint, hydraulic legs, regular return iddler and fully enclosed galvanized covering (2020)
• Stacker Conveyor, approx. 24 in. width belt x 70 ft. long, w/ hopper, Westinghouse 10 hp motor, Sala 21420 gearbox, dodge bearing, vulcanized belt joint, adjustable leg, Strongco regular return iddler, fully enclosed plastic covering 
• SOLD Vickey Radial Stacker Conveyor, approx. 30 in. width belt x 85 ft. long, w/ hopper approx. 12 ft. x 8 ft., Teco Westinghouse 15 hp motor, gearbox TXT425, vulcanized belt joint, adjustable leg, regular return iddler (2018)
• Radial Stacker Conveyor, approx. 30 in. width belt x 100 ft. long, w/ Epac 20 hp motor, 600 volts,  dodge gearbox TXT525, vulcanized belt joint, adjustable legs, regular return iddler (2010)

LABORATORY EQUIPMENT-LAB ASSETS

• SOLD Xrite Spectrophotometer, model ci4200
• Hunter Lab Spectrophotometer, model colorflex EZ (2022)
• W.S. Tyler Rotap Sieve Shaker, model RX-29 S/N 18904
• W.S. Tyler Rotap Sieve Shaker, model RX-29 S/N 10-4854
• Various sieves ranging between 325 mesh to 9mm
• Ohaus Lab Scale (0-1.5kg)

PLANT SUPPORT EQUIPMENT-ELECTRICAL ASSETS

• Klokner Moelle MCCs
• Distribution panels
• Breaker panels
• Stop and start panels
• Safety switches
• Capacity banks
• Transformers

Important Information:

• All assets are sold AS IS, WHERE IS.
• Please review the catalogs and read all LOT Descriptions carefully.
• Buyer’s Premium is 18%.
• QST & GST - total sales tax is 14.975%.
• Sale is conducted and payable in USD Funds.
• Port of Quebec Entry Requirements
• Complete Terms & Conditions

Please contact us for information about rigging and removal.

For further information, and to schedule an appointment for inspection, please contact Terrance Jacobs at 905-660-1367 or email at tjacobs@managingyourassets.com