Durma SB 3006 NT 3100 mm x 6 mm Metal Cutting Shear w/ Squaring Arm, Thickness cut capacity: 6mm, length cut capacity: 3100 mm, shear stroke: 105mm, strokes per mintue: 15, lubrication capacity: 170 Lt. Equipped with 5' squaring arm, sheet supports, and ENC 100m backgauge controller. Year: 2007. Approximate weight: 7250 Kg, approximate dimensions: 3530 mm x 4300 mm x 2180 mm high.
Amada Vipros 255 CNC Turret Punch Press, Punch Tonnage: 22, maximum traverse: 50\" x 50\", maximum sheet size (with repositioning): 50\" x 100\", maximum hits per minute on 1\" centers: 340, maximum sheet weight: 110 lbs, maxium positoning speed: 2559 IPM (X) 1968 IPM (Y), tool positions: 31, turret speed: 30 rpm, air requirement: 80 PSI, punching accuracy: ±0.0027? (standard), punching accuracy: ±0.002\" (high accuracy mode), positioning accuracy: ±0.0014\", repeatability: ±0.0006?, power required: 22 KVA. Equipped with Fanuc Series 18-P CNC controller and Koolant Koolers chiller. approximate weight: 9,900 KG, approximate dimensions: 2540mm x 5030mm x 2057mm high.
Omnitech Selexx PAL 5' x 10' CNC Router, Table Size: 5? x 10?, Spindle HP: 10 HP, Spindle Taper: HSK-63F, Spindle RPM Range: 1,000 – 24,000, Number of Tool Positions: 8, Number of Drills on Drill Bank: 9. Equipped With 5? x 10? Vacuum Table, 10 HP HSK-63F ATC Spindle, 9 Spindle Drill Bank, 8 Position Carasoul Style Tool Changer, PC Controller.
2017 Giardina Spray Finishing Line, This line was used for spray finishing wood beams. Line is currently decommissioned. It's equipped with 2 - WAYS 90° or 180° Infeed System for Beams with 180° Tilting System + TILTING \nSYSTEM FOR 600 mm width PANELS, Spraying Station for Lacquer & Stain + Stain Brushing, 180° Cross Drying Oven, 6,6500 mm. Roller conveyor. Technical specs as follows; Minimum work piece length: 1,000 mm, maximum workpiece length: 11,950 mm, minimum workpiece width: 48 mm, maximum beam width: 300 mm, maximum panel width: 600 mm, minimum thickness: 28 mm, maximum beam thickness: 600 mm, maximum panel thickness: 80 mm, maximum bow/PANEL: 10 mm Over 1,000 mm, designed line speed: 10 - 30 mt/min. (SUBJECT TO CONFIRMATION)
2018 IECHO TK3S 3516 3500 mm x 1600 mm Digital Flatbed Cutter (Never Used), Cutting area: 1600 mm x 350 0mm.
2018 Tiege Automatic PUR 53\" Lamination Line, Equipped with lamination section, glue spreader section, brusher section, slitter section, and infrared oven station.
2015 Nordson VersaDrum 8149521 Bulk Melter, Drum diameter: 571 mm (22.5 in) or 567 mm (22.3), Maximum Pump Rate1: 270 kg/hr (595 lb/hr), Number of Hoses/Applicators: 2 standard (hydraulic & electrical) up to 6 additional (electrical only), Maximum Working Hydraulic Pressure: 85 bar (1233 psi), Operating Temperature Range: 40 to 230°C (100 to 450°F), Ambient Temperature Range: -5 to 40°C (23 to 100°F), Temperature Control Stability: +/- 1°C (2°F), Temperature Sensor: Ni 120 (or PT-100 optional), Maximum System Power Capacity : 39000 watts. Approximate weight: 672 kg, approximate dimensions: 1520 x 3010 x 740 mm.
Dantherm FMC 200-8A Dust Collector, CFMs: 12,000, total horsepower: 40. Equipped with 32 total air filters, air pulse for cleaning bags. Year: 2007.
2014 SCM F 410 Nova 410 mm Long Bed Jointer, Cutting head working width: 410 mm, cutter block diameter: 120 mm, dimension of standard knives: 410 mm x 35 mm, jointer bed length: 216 0mm, main motor hp: 8, maximum stock removal 8mm. Approximate weight: 580 Kg
2019 Langzauner LZK3-NCV Edge Sanding Machine, Motor power sanding belt: 2.2 KW, Belt speed: approx. 22 m/s, Operating voltage: 3 x 400 V + N + PE / 50 Hz, Belt length: 2.600 mm, Belt width: 150 mm, Table size: 1.450 x 350 mm, Height adjustement range of the sanding belt: 200 mm, Sanding beam continuously variable tiltable 90° – 45°, Feeding speed continuously variable adjustable from 4 – 17 m/min, forward or backward motion, Suction vacuum: 850 Pa, Volume flow: 956 m³/h, Air velocity: > 20 m/s, Extraction connection diameter: 140 mm. Equipped with folding up fence, conveyor belt, extendable workpiece support, control console, paint sanding package, contact rollers, removable stop extensions. Approximate weight: 630 Kg, approximate dimensions: 1850mm x 1400mm.
MD Dario SV3 Articulating Vertical Bandsaw, Cutting width: 390 mm, articulating arm length: 1 mt/ 3ft, maximum cutting height: 300 mm, dimension of work surface: 500 x 400 mm, maximum blade length: 2530 mm, maximum blade width: 3 mm. Equipped with articulating arm and mobile trolley base.
Aladin 2055E 50 Gallon Parts Washer, Water capacity: 40 gallons, motor hp: 3, wattage of heaters: 7 KW, load capacity: 1,000 lbs, load height: 31\", turntable diameter: 24\", number of 0 degree spray jets: 56. Equipped with stainless steel air shield, seal-less door, oil skimmer, dry floor waste water, disposal system large basket, NG / LP. Approximate weight: 430 Kg, approximate dimensions: 1016 mm x 1397 mm x 1905 mm H.
Vestil CJ-BEAM-SN 50 Ton 41\" - 55\" Hand Crank Trailer Jack, Static load capacity: 50 tons, lifting load capacity: 25 tons, service range: 41\" to 55\"
2019 Enkon LPH01 48\" x 120\" 4,000 lb Post Lift (Never Used), Maximum lift capacity: 4,000 lbs, base dimensions: 48\" x 120\"
Hytrol SB 16\" x 20' Horizontal Belt Conveyor (Never Used), Belt conveyor width: 16\", approximate conveyor length: 20\"
Hytrol SB 16\" x 24' Horizontal Belt Conveyor (Never Used), Belt conveyor width: 16\", approximate conveyor length: 24\"
Hytrol SB 16' x 30' Horizontal Belt Conveyor (Never Used), water capacity: 40 gallons, motor hp: 3, wattage of heaters: 7 KW, load capacity: 1,000 lbs, load height: 31\", turntable diameter: 24\", number of 0 degree spray jets: 56. Equipped with stainless steel air shield, seal-less door, oil skimmer, dry floor wa
Univeyor 30\" x 120\" Gravity Roller Conveyor , Width: 30\", length: 10'
FMH Nesta Flex 226 18\" x 16'-9\" Flexible Gravity Conveyor , Number of legs: 5, length extended by 5-1/4\" axle center: 16'-9\", length extended by 4\" axle center: 12'-9\", length extended by 3\" axle center: 9'-7\", length contracted: 4'-3\"
FMH Nesta Flex 226 Flexible Gravity Conveyor , Number of legs: 5, length extended by 5-1/4\" axle center: 16'-9\", length extended by 4\" axle center: 12'-9\", length extended by 3\" axle center: 9'-7\", length contracted: 4'-3\"
Verti-Lift SL36-20 36\" x 84\" 2,000 Lb Scissor Lift, Lift capacity: 2,000 lbs, table dimensions: 36\" x 84\"
Vulcan 3 Ton Electric Crane Hoist, Lift capacity: 6000 lbs, speed: 9 ft / min
Assembly Automation SA-1.5 Automatic Screw Feeder, Feed rate: Up to 60 screws/min, air consumption: 8 CFM.
SMC ACT 400U-2 400 SCFM Air Dryer, Nominal flow rate: 400 scfm, max air pressure: 200 psig, max inlet air temp: 160 F
Viar VMC-240 Temperature Controller, Heating medium: water, temp. range: 35-100 C, pump power: 1.5 KW, pump flow: 180, heater KW: 12x2. Equipped with Alggin thuro mech glue line.
Genie Z-30/20HD Articulated Boom Lift, 2 Speed Traction Drive Transmission, 2WD, Hydraulic Relief: 3,500 psi, Capacities: Hyd Tank = 24 gal, Fuel = 17 gal, Lift Capacity: 500 lbs - 2 Occupants, Max Platform Height: 45', Max Working Height: 51'11\", Max Reach: 25', Platform Rotation/Max Grade: 180 degree/30%, Tires: Wearmaster 9-14.5 355/55 D625, Wheelbase: 6'8\"
