2013 Specto model Spectromaxx iron base spectrometer model LMF06 s/n 137803/13 with monitor and printer, 29 elements
MSA helmets and chargers
Couth 1/2\" tape writer
2013 Faro arm and table and case s/n R04-13-11264, single point 0.016mm, =volumetric +/-0.023mm
Amscope top mounted microscope with 10x binocular, video and monitor
Buehler polimet 1000 wet polisher and table
Mitutoyo 30\" micrometer with case
Mitutoyo 24\" vertical micrometer
30\" x 32\" steel table and stand
Global floor scrubber
Tennent model s10 floor sweeper
Clausing model 227a pedestal drill s/n 2m00794
National Electric model 12868 36\" crane magnet s/n 4700300
underslung bridge crane approx. 30' span with Detroit 5 ton electric hoist with 3 way pendent controls
furnace charge feeder 60/30\"x approx. 11' long x 20\" deep
(2) 36\" x 60\" deep charge buckets and gas fired preheat system with controls
Inductotherm unipac melting system with power supply, interconnecting buss and cables, 8 ton steel shell furnace with stand, water and hydraulic systems, Niagara cooling tower, Westinghouse power transformer
Heraeus model sensor lab foundry temperature indicator with monitor
3 ton Electro lift electric hoist with pusher, radio controlled
Cambridge model CSW-15at-cs 10,000# crane scale s/n 21-19531
Modern 39\" x 38\" geared ladle
Unknown capacity furnace charge hoist with radio controls
Modern 2000# geared treatment ladle
EMI model 722 RJW molding machine with control stand
Harrington 1 ton electric hoist with pendent controls
C/M valustar 1 ton electric hoist with pendent controls
mold handling system with 22- 36\" x 52\" cars, track system and hand transfers
11 sets of steel flasks 28\" x 36\" x 11/11\"
C/M loadstar 1 ton electric hoist with pendent controls
Harrington 1 ton electric hoist with radio controls
C/M loadstar 1/2 ton electric hoist with pendent controls
HiVac model 230 portable vacuum s/n HV-5447 with hopper
Modern geared teapot ladle 21\" x 21\"
#1 Beardsley and Piper model 2016 matchblomatic molding machine with hydraulic system, feed belt conveyor with drive
2- pallet lines with 18\" x 60\" carts, air operated mold dump, air operated mold lifts, assorted aluminum bottom boards
C/M long lift electric hoist
Beardsley and Piper model 75b speedmuller with dust hood, batch hopper, Hartley compactability, starter and controls
Whirl-air-flo model H350 Sand transporter controls
Whirl-air-flo sand transporter s/n 11-125-102 with Allen Bradley MicroLogix 1200 plc controls
Donaldson model DLM (cased) 2/2/15 cartridge pulse dust collector s/n IG768933
#2 Beardsley and Piper model 2016 matchblomatic molding machine s/n BSN-2016-447-8583 with hydraulic system (note: common to the handling system), feed belt conveyor with drive, light curtain, Allen Bradley SLC 5/03 plc controls
#2 1620 mold handling system double wide pallets, 2 lines, weight and jacket shifter, weights and jackets, 24 pallet per line, Allen Bradley SLC 5/03 plc controls, hydraulic system (note: common to the molding machine)
#3 Beardsley and Piper model 2620 matchblomatic molding machine s/n BSN-2620-147-7507 with hydraulic system, feed belt conveyor with drive, light curtain, Allen Bradley SLC 5/03 plc controls
Beardsley and Piper 4 line continumatic mold handling system with 26\" x 20\" bottom boards, 2-lines 19 molds per line, 2- lines 15 molds per line, weight and jacket shifter system, weights and jackets, transfers, Allen Bradley plc controls
G/K mold dump oscillating conveyor with drive and hood, 42/36\" wide x approx. 60' long x 8\" deep pan
G/K mold transfer oscillating conveyor with drive and hood, 42/36\" x approx. 15' x 8\" deep pan
G/K transfer oscillating conveyor with drive and hood, 42/36\" x approx. 20' x 8\" deep pan
G/k incline oscillating conveyor with hood and drive model sc 36.54 s/n c7723-1, 42/36\" x approx.54' x 8' deep pan
flat bed type mold shakeout 7' x 6' with drive
Conveyor Dynamics oscillating conveyor 36\" x approx. 18' x 8\" deep pan
2008 Didion model MD50MK5 media drum shakeout s/n DM1269R with Fixed 15 hp drive, covers
G/K sorting oscillating conveyor with drive, 42/36\" x approx. 17'
2022 Bobcat model 450 diesel powered skid steer loader s/n B4RH11585, with heavy duty bucket 62, 15.3 cu ft, 1925 hours
grinding station with 3' x 5' lift table and back draft hood (no tools)
grinding station with 3' x 3' lift table and back draft hood (no tools)
Zeks model CDP 24020FO breathing air dryer s/n 145787
Harrington 1/2 ton air hoist with rope controls and approx. 15' bridge
Setco model 300, 925-520 30\" single end left hand snag grinder with snap trap
Setco model 300, 725-520 30\" single end right hand snag grinder with snap trap
Fox 30\" double end snag grinder with safety guards, 2- 25hp motors
fox model G50SSR 30\" right hand snag grinder s/n 8956079 with safety guard, 25 hp motor
4- drop bottom stands
Wheelabrator 14 cu ft super tumblast cleaning machine with floor loader, shot return system, direct drive shot wheel
shot blast discharge oscillating conveyor 30\" x 12' x 8' deep pan, end drive
(12) 32\" x 34\" x 24\" deep drop bottom tote boxes
Atlas Copco model GUA807 screw type air compressor s/n ARP-865-426, 86.119.480.05/4, 100hp motor, 50,897 hours
Zeks heat sink model 2000HSFA400 refrigerated air dryer s/n 295883
air receiving tank approx. 3' x 8'
air receiving tank approx. 4' x 10'
Zeks model 2400HDF filter s/n 293610
wedges and hydraulic system with Wedge model HW175 wedge, Wedge model HW100 wedge and 2017 LGT model HW20HP 20 hp hydraulic system s/n HW20163 (Note: located on second floor)
Harrington 1 ton electric hoist with pendent controls and approx. 10' bridge
Cincinnati model 106 type 303-202 bench mounted double end grinder s/n 248486 and table (no tools)
2021 barrel transporter and dumper model HDD-60-10-p s/n s2100424, 1000# capacity
2014 Jordan class onan/onfaf 3 phase 60 hertz power transformer s/n 8178 rated at 2100/2415 KVA, 13,9800 primary volts, 1500Y/866 secondary volts, 6.33 impendence, 5 high side taps (not installed)
B2, Quincy model QSI 1000 screw type air compressor s/n Bu1212070059, 200 hp motor, rated at 1000 cfm, 68032 hours
B1, Quincy model QSI 1000 screw type air compressor s/n BU1212070124,200 hp motor, rated at 1000 cfm, 68055 hours
Torit model dft4-16 cartridge pulse dust collector s/n IG498626-001 with New York blower model series 20 GI fan, size 334 DH s/n R06285.100, motor and controls
2012 PowerCore 16,000 cfm cartridge pulse dust collector with New York ACF/PLP class IV fan s/n G06928-100, 50 hp motor and controls
27 pieces of 28\" x 38\" x 8' deep steel flasks
14 pieces of 32\" x 32\" x 11\" deep steel flasks
furnace starter blocks in two piles, approx. 190 pieces
Fox model TMC 20\" table mounted cutoff saw s/n 3880332 with 25 hp motor and table
table mounted 20\" cutoff saw with 25 hp motor and table
C/M 1 ton electric hoist with pendent controls
Mold dump oscillating conveyor with drive, 40/30\" x approx. 35' x 8' deep pan
Incline belt conveyor with drive 30\" x approx. 15'
Whirl-air-flo sand transporter with controls (in basement)
G/K model SC 36-10 mold transfer oscillating conveyor with drive s/n C4544-2, 40/36\" x approx. 10' x 8\" deep pan
Dependable model 200Fa fully automatic shell core machine s/n 334 400FA with sand feed, plc controls and gas panel
Redford model HP43 shell core machine with plc controls
Redford model HP43 shell core machine
Approx. 15' bucket elevator with drive and hopper
Simpson model 1.5f sand muller with drive and skip loader, dust hood and aerator
Harrington 2 ton electric hoist with pendent controls and approx. 15' bridge
Ingersol Rand 1 ton air hoist with rope controls and approx. 15' bridge
Dependable electric sand heater with controls, receiving hopper and supports
Kloster type I 200# mixer s/n MS-7396, controls and 2- pumps
Kloster 500# compaction table s/n MS-7414 with controls, 30\" x 36\" table and roller conveyors
Round dust collector with blower and motor and controls
4' x 6' lift table sand controls
2003 Redford model SACM-25 25# cold box core station s/n 118-SSCM-25 with Allen Bradley MicroLogix plc controls, Kloster 50# mixer, 3- pumps
Gorbel 150# floor mounted balancer
Dietert model 276 moisture tester
Dietert filler and tubes
Dietert model 315 sand rammer with base
Dietert model 338 electric permmeter
Tyler model RX-24 sieve shaker and screens
Dietert model 401 motorized sand strength machine
blue Torit dust collector with New York model series 20 GI fan, size 404DH s/n T08412-100 blower and motor and controls
gray Pangborn pulse bag dust collector model 150-M10-CP-2 with Cincinnati model HDBI-240 blower s/n 9919707, 40 hp motor and controls
Greenheck roof mounted exhaust blower model USF-333-10-BI-150-x s/n 14288031
Sand silo approx. 8' x diameter x 15' straight section and 4' cone section with supports and bin vent dust collector
sand silo approx. 10' diameter x 12' straight section and 8' cone section with supports and bin vent dust collector
Furnace Coil and Accessories
Detroit Testing Hardness Tester Model HBE-3000A S/N 0038
Lincoln Electric Invertec V276 Stick/Tig Welder with Cart and Leads/Clamp
Welding SafTCart Cart with Heavy Duty Cutting Torch Smith SC229 (No Tanks)
Werner 300 Lbs. Capacity 5? ?A? Frame Ladder
Ega Products 450 Lbs. Capacity Warehouse Ladder 7-Steps
Seymour Seymour S500 Wheel Barrow
Hand Truck
Lot of (8) Weights
24\" Air Master Warehouse Pedestal Fan
30\" x 60\" x 35\"H Welded 2-Shelf Utility Cart
24\" x 48\" x 35\"H Welded 2-Shelf Utility Cart
Lot of Hand Tools and Weights
Bullard Free Air Pump Model EDP10
Dewalt 14\" Chop Saw D28715
Lot of New Starrett HSS Bi-Metal BS1406-7 and Bahco Sandflex Bi-Metal Hacksaw Blades
Lot of (8) Assorted Ratchets, Extensions and Sockets
Pioneer Tool Box and Contents
Stackton Tool Box and Contents
Lot of (2) Pioneer Tools Boxes with Contents
Lot of (6) Vise Grips, (3) Ridgid Pipe Wrenches and (7) Adjustable Wrenches
Chicago Pneumatic CP9789C Reversible 1/2\" Drill
Lot of Assorted Machine Screws
Lot of (18) Assorted Wrenches
Lot of (12) Assorted Wrenches
Lot of (7) Assorted Pneumatic Tools
Lot of (14) Assorted Sledge Hammers, Mallets and Ball Hammers
Lot of (2) Pallet Pullers PUL-P109 and Pal-12
Titan Lift-Rite 5500 Lbs. Capacity Manual Pallet Jack (Delayed Pick up Until 10/20)
Uline H-1785 Scissor Lift Pallet Truck 2200 Lbs. Capacity, Max Height 31-1/2\"
Uline H-1785 Scissor Pallet Lift Truck 2200 Lbs. Capacity, Max Height 31-1/2\"
Strapping Cart and Tools
Air Hose and Cox Reels Cart
Pattern Cart (no patterns)
Lot of (2) Jorgensen Bar Clamps
Lot of (4) Assorted Bar and C Clamps
Lot of (5) Bar Clamps
Lot of (2) Rubbermaid Big Wheel Dump Carts
Cotterman 450 Lbs. Capacity Warehouse Ladder 9-Steps
Werner 300 Lbs. Capacity 8? ?A? Frame Ladder
Bremen Air Receiving Tank Approx. 3? x 8?
Sylvan Air Receiving Tank Approx. 3? x 8?
Storage Cabinet with Contents, Including: Bolts, Air Hose, Extension Cord and Supplies
Lot of (4) Assorted Wheel Barrows
Lot of (5) Assorted Wheel Barrows
Barrel Dolly
Lot of (2) 5' High Flammable Liquid Storage Cabinets with Contents
Lot of (2) Assorted Flammable Liquid Storage Cabinets with Contents
Chop Saw/ Grinder
Lot of (3) Assorted Warehouse Pedestal Fans
Lot of (8) Assorted Warehouse Wall Mounted Fans
Morgan Milwaukee 60 6? Bench Vise and Work Bench
Lot of (2) Harper Hand Trucks
Lincoln Electric A225 Arc Welder
30\" x 48\" Acrotech Work Bench and Tools
Lot of (2) Heavy Duty Bins
30\" x 48\" Acrotech Work Bench
Delta 12? Disc Sander Model 31-140 1/2 HP
Titan Lift-Rite 5500 Lbs. Capacity Manual Pallet Jack (16\" Wide Forks)
Titan Lift-Rite 5500 Lbs. Capacity Manual Pallet Jack (27\" Wide Forks)
24\" x 36\" Work Bench
Louisville 300Lbs. Capacity 10? ?A? Frame Ladder
Lot of (2) Ridgid Pipe Wrenches, (1) Adjustable Wrench and (2) Open End Wrenches
Lot of (4) Powermate VX Pneumatic Grinders
Lot of (5) Assorted Pneumatic Grinders
Lot of (5) Powermate VX Pneumatic Grinders
Lot of (6) Chicago Pneumatics Grinders
Lot of (6) Pneumatic Angle Grinders
Lot of (2) Chicago Pneumatic Grinders
Lot of (2) Metabo Angle Grinders
Lot of (7) Huntington #2 Wheel Dressers
Lot of (2) New and (2) Used Jergens KLP, T-Handles 1 x 3.00 SS 801169
