Titan Ribbon Blender, 250 Cubic Feet,manufacturer: Titan / Oy Petsmo Products (Finland), capacity: 7000 liters, interior dimensions : 54" wide x 156" long x 64" deep, motor: 50 hp, 600 volt, 15 output rpm approx., bottom end discharge : 16" diameter with stainless steel pneumatic knife gate valve, open top with lid & safety grate, with lifting lugs, previous use: mink feed manufacturing, overall shipping dimensions : 6' wide x 18' long x 8'3'' high, 9000 lbs, *Interior main shaft has been repaired and was in working service at time of decommissioning.(Subject to Confirmation)(ID:9730, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 20" Diameter x 264" Long,manufacturer: Titan / Oy Petsmo Products (Finland), motor: 10 hp, 575 volt, 40 output rpm approx., triple discharge conveyor, with partial safety grate, stainless steel contact parts, previous use: mink feed manufacturing, *No name plate on the motor, information as follows: Manufacturer: SEW Eurodrive Type: FA97 DV132 M4/C Voltage: 575v 60 hz Power: 7.5 kw RPM: 40 Amps: 19.1/11.0(Subject to Confirmation)(ID:8446, Mandatory Rigging Fee: $50.00)
Hapman Screw Conveyor, 2' diameter x 48' long,manufacturer: Hapman, model: txmq2-5-140tc-140tc, with stainless steel control panel, screw dimensions: 2" diameter x 48' long, top feed hopper: 48" x 48" x 52" deep, motor: 1.5 hp, 575 volt, 1760 rpm, with variable speed controller, final output: 0-352 approx., mounted in a stainless steel frame, with integrated forklift tubes, with safety grate, previous use: food application(ID:8310, Mandatory Rigging Fee: $50.00)
Gemco Double Cone Blender, 8 qt Lab Blender,manufacturer: Gemco, model: 8 qt lab blender, motor: 1 phase, 208 volt, discharge: 4', emergency stop, previous use: pharmaceutical application(ID:8329, Mandatory Rigging Fee: $50.00)
66 Gallon Tank (Vessel), 316 Stainless Steel, Full Vacuum,mawp: 50 psi @ 300 deg.f, vessel rated for 15 psi full vacuum service, national board no. 7110, interior dimensions: 28'' diameter x 28'' straight side, center discharge: 1'', dish top and bottom, top lid inlets: three 1.5'', with stainless steel grab handles, vessel mounted on casters, previous use: pharmaceutical application, shipping dimensions: 48'' x 48'' x 62'' high, 750 lbs(ID:8390, Mandatory Rigging Fee: $50.00)
Coating Pan Drum Tumbler, 24\" Diameter X 48\" Long,output RPM 0 to 16 approx., interior dimensions: 24'' diameter x 48'' long, with interior stainless steel flights, 1.625'' deep, with discharge chute, stainless steel washdown motor, with variable speed controller, power requirements: 120 volt, tumbler mounted on a stainless steel frame with casters, frame footprint: 28'' x 45', previous use: food application, contact parts: 304 stainless steel, shipping dimensions: 48'' x 62'' x 78'' high, 500 lbs(ID:8365, Mandatory Rigging Fee: $50.00)
Feldmeier 60 Gallon Tank (Vessel), 316L Stainless Steel, Full Vacuum,manufacturer: Feldmeier, mawp: 60 psi @ 367 deg.f, vessel rated full vacuum, national board no. 5694, asme rated, sanitary interior polish, center discharge: 2'' with valve, dish top and bottom, lid equipped with CIP spray ball, with stainless steel grab handle, vessel mounted on casters, previous use: pharmaceutical application, shipping dimensions: 48'' x 48'' x 60'' high, 750 lbs(ID:8389, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 9' diameter x 108' long, Variable Speed, with stainless steel control panel, with variable speed drive, screw dimensions: 9'' diameter x 108' long, with lid, top stainless steel feed hopper with safety grate, stainless steel washdown motor: 1 hp, 575 volt, 1740 rpm, stainless steel washdown gearbox, discharge: 8 diameter, distance from floor to discharge: 51'', mounted in a stainless steel frame with casters, previous use: food application, shipping information: 48'' wide x 142'' long x 72'' high(Subject to Confirmation)(ID:8512, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 9' diameter x 108' long, with stainless steel control panel, screw dimensions: 9'' diameter x 108' long, with lid, top stainless steel feed hopper with safety grate, xp motor: 1 hp, 575 volt, 1760 rpm, stainless steel washdown gearbox, discharge: 8 diameter, mounted in a stainless steel frame with casters, previous use: food application, infeed height: 73'' h, discharge height: 60''(Subject to Confirmation)(ID:8524, Mandatory Rigging Fee: $50.00)
Fitzpatrick Hammer Mill, Swinging Hammers, With Screw Feeder,manufacturer: Fitzpatrick (no name plate), motor: 575 volt, 3500 rpm, with feed hopper and screw feeder, with stainless steel control panel, mounted on frame with casters, previous use: pharmaceutical application, shipping information: one skid 54'' x 60'' x 78'' high, 1000 lbs(Subject to Confirmation)(ID:8412, Mandatory Rigging Fee: $50.00)
AGC Plate Heat Exchanger, Sanitary,manufacturer: AGC, model: PR03-SH, inlet & outlet: 3\" tri clamp, 109 stainless steel plates, plate dimensions: 16'' x 45'', all stainless steel construction, previous use: food processing plant, shipping dimensions: 48'' x 96'' x 88'' high, 3500 lbs(ID:8436, Mandatory Rigging Fee: $50.00)
Donaldson Torit Dust Collector, Model UMA 100, 1000 CFM,manufacturer: donaldson torit, model: UMA 100 UniMaster, filter area: 100 sq.ft. approx, fan motor: 2 hp, 208.230/460 volt, 3450 rpm, with 480 volt quick connect plug, with integrated control panel, with 23 gallon dust container(ID:8429, Mandatory Rigging Fee: $50.00)
Quadro Comil, Model 194,manufacturer: Quadro, model: 194-S, serial no. 194-0198, motor: 5 hp, 230/460 volt, 1720 rpm, pulley ratio: 5.5:4.5, with screen, inlet: 6'', discharge: 9.5'', discharge from discharge to floor : 50'', mounted on stainless steel frame, previous use: food application, shipping information: 48'' wide x 48'' long x 80'' high(Subject to Confirmation)(ID:8495, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 4' diameter x 138' long, screw dimensions: 4'' diameter x 138'' long, discharge height: 83'', discharge spout: 4.5'' x 8'', liquid drain: 2'', stainless steel washdown motor: 3/4 hp, 208-230/460 volt, 1725 rpm, stainless steel feed hopper with magnetic safety grate: 15'', 25'' x 26'' x 2'', 12'' deep, all stainless steel construction, overall size: 42'' wide x 140'' long x 97'' high, previous use: food application link to test video: https://youtube.com/shorts/Bnt4-dx9Elc(ID:8498, Mandatory Rigging Fee: $50.00)
400 Gal Feldmeier Ribbon Blender,interior blender dimensions: 60'' wide x 43'' long x 51'' deep, center discharge:, half top with swinging lid, top inlets: 3 x 3.5'' tri-clamps with 3 x CIP balls, 1.5'' tri-clamp, motor: 15 hp, 230/460 volts, 1765 rpm, output rpm: 32 rpm approx. :center discharge: 4'' tri-clamp with pneumatic valve, stainless steel construction, shipping dimensions: 74'' wide x 96'' long x 98'' high @4000lbs, *Requires shaft end seals(Subject to Confirmation)(ID:8497, Mandatory Rigging Fee: $50.00)
SPX Rotary Lobe Pump, Model 130-U1, 10 HP,manufacturer: Waukesha (USA), model: 130-U1, stainless steel gear casing, capacity: 72 gpm approx., inlet & outlet: 3'' tri-clamp, motor: 10 hp, 208. 230/460 volt, 1750 RPM, output rpm: 285 output approx., pump is on a stainless steel base, previous use: food application, stainless steel contact parts, shipping dimensions: 48'' wide x 66'' long x 30'' high, 1000 lbs(ID:8506, Mandatory Rigging Fee: $50.00)
SPX Rotary Lobe Pump, Model R2, 3 HP,manufacturer: spx, model: r2, inlet & outlet: 1'' tri clamp, motor: 3 hp, 208.230/460 volt, 1725 rpm, with variable speed, with quick connect plug, with control panel, pump mounted on stainless steel cart with casters, rubber lobes, the ''r2'' pump consists of a simple design with few parts making it ideal for manually cleaned applications and can be disassembled in a few minutes.(ID:8469, Mandatory Rigging Fee: $50.00)
Sine Positive Displacement Pump, Model MR160,manufacturer: MasoSine, model: MR-160, capacity: 53 gpm approx., stainless steel washdown motor: 5 hp, 575 volt, 1750 rpm, stainless steel gearbox ratio: 22:1, output rpm: 80 approx, infeed/ outfeed: 2 x 6'' tri-clamp, impeller diameter: 10.5'', max. flow rate: 396 gpm, max. viscosity: 2, 000, 000 cSt, solid handling: 2.36'', displacement per revolution: 0.66 gal/ 2.5L, previous use: food application, shipping information: 48'' wide x 60'' long x 36'' high, 1000 lbs(ID:8519, Mandatory Rigging Fee: $50.00)
Twin Vulcan Kettles,total capacity: 300 gallons, manufacturer: Cleveland Range, model: TMKDL-150T, jacket pressure rating: 35 psi @ 281 deg.f, national board no. 21895 & 21896, crn no. H6466.56, direct steam model, center discharge: 3'' tri-clamp, interior dimensions: 40'' diameter x 36'' deep, previous use: food application, built in agitator system (requires anchor), power tilting mechanism(ID:9729, Mandatory Rigging Fee: $50.00)
Eriez Magnetics Magnet Trap, 10'' x 12.5'',manufacturer: Eriez Magnetics, model: TGH.2, serial no. T977186, eleven (11) removable magnetic bars, inlet & outlet:10'' x12.5'', previous use: food application(ID:9404, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 39'' Wide X 70'' Long, With Spray Bar Applicator, manufacturer: Hager Industries (2019), with interior spray bar for liquid application: 3'' inlet, hopper discharge: 2.5'', stainless steel washdown motor & gearbox, with stainless steel control panel (start / stop & variable speed drive), 0.5 hp, 575 volt, flip up conveyor ends, stainless steel mesh belt dimensions: 39'' wide x 70'' long, infeed / discharge height: 37'' high, mounted stainless steel legs with casters, previous use: food application, shipping information: 64'' wide x 80'' long x 46'' high, 750 lbs (ID:8525, Mandatory Rigging Fee: $50.00)
Donaldson Torit Vibra-Shake Dust Collector, with 7.5 HP Fan,manufacturer: Donaldson Torit, model: VS3000, rated 1800-3300 CFM approx., square feet : 354 approx., motor: 7.5 hp, 575 volt, 3450 rpm, with Donaldson Torit downdraft bench dust collector, model: RDB2000(ID:8318, Mandatory Rigging Fee: $50.00)
Netzsch Progressive Cavity Pump, 3'', With Screw Conveyor,manufacturer: netzsch (2021), model: NM045SO08S36B, outlet: 3'' tri-clamp, flow rate: 4.24 gpm approx., motor: 15 hp, 230/460 volt, 70 output rpm approx., with top mount 7'' diameter x 128'' long screw conveyor, double stainless steel feed hoppers with CIP rods : 32.5'' x 19'' x 17'' deep, motor: 2 hp, 208.230/460 volt, 25 rpm approx., mounted on stainless steel base with casters, previous use: food application, stainless steel contact parts, overall dimensions: 25'' wide x 216'' long x 52'' high(Subject to Confirmation)(ID:7971, Mandatory Rigging Fee: $50.00)
Sweco Vibrating Screen, 48'',manufacturer: Sweco, model: 1S48C886, serial no. IS4S-570-48, motor: 2.5 HP, 230/460 volt, 1120 RPM, two steel decks, with top lid, previous use: cosmetic application, currently equipped with one screen, 36T, the screen are currently setup in a self-cleaning style with Perforated Plate Screens and sliders on each screen, shipping information: 60'' wide x 60'' long x 52'' high(ID:9422, Mandatory Rigging Fee: $50.00)
Pulva Pulverizer Hammer Mill, Swinging Hammers, 20 HP,manufacturer: Pulva Pulverizer, model: B type FS, cone hopper feeder: 15'' x 16'' x 11'' deep, motor: 20 HP, 208-230 volt, 3505 rpm, with dual feed screw conveyor, motor: 1/2 HP, 230/460 volt, 1725 rpm, previous use: industrial application, carbon steel contact parts, shipping information: 52'' wide x 64'' long x 81'' high @1600LBS(ID:9430, Mandatory Rigging Fee: $50.00)
Titan P4000/250 Homogenizer #9711,motor: 75 hp, 600 volt, no motor name plate, previous use: mink feed application(Subject to Confirmation)(ID:9711, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 3'' Wide X 80'' Long, manufacturer: Orientech, power requirements: 120 volt, with stainless steel control box, with variable speed controller, cleated belt dimensions: 3'' wide x 80'' long, cleat depth: 1.5'', distance between cleats: 6.5'', stainless steel feed hopper: 9'' x 22'', with plexiglass lid, distance from ground to infeed of hopper: 44'', discharge height: 80'' approx., with discharge chute, mounted stainless steel frame with casters, adjustable inclination, previous use: food application, shipping information: 48'' wide x 72'' long x 86'' high, 750 lbs (ID:8364, Mandatory Rigging Fee: $50.00)
Unused 6000 Gallon Tank, 304 Stainless Steel,interior dimensions: 9'6'' diameter x 11'3'' straight side, top and bottom side manways with lids, with top cip spray ball, slope to middle & bottom end discharge: 3'' tri-clamp, side wall gauge: 16, bottom gauge: 11, spray foam insulated bottom, shipping dimensions: 11' wide x 14' long x 11' high, weight empty: 3200 lbs approx., unused, never put into service, interior welds are not food grade polished(Subject to Confirmation)(ID:8452, Mandatory Rigging Fee: $50.00)
Rietz Screw Conveyor, screw dimensions: 8.5'' diameter x 132'' long, charge height: 37'', discharge height: 101'', discharge spout: 8'' x 11.5'', shaft diameter: 3'', blade diameter: 8'', liquid drain: 2'' NPT, motor nameplate missing, specifications unknown, gearbox ratio:14.1, pully ratio: 2:1, stainless steel feed hopper with safety grate: 24'', 8.5'' wide, 28'' long, 21'', 11'' deep, all stainless steel construction, overall standing: 36'' wide x120'' long x 115'' high, missing seal/bushing/sleeve between shaft and base at bottom on conveyor, shipping information: 48'' wide x 156'' long x 72'' high(ID:8499, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 14'' Diameter X 112'' Long,top stainless steel feed hopper: 55'' x 92'' x 22'' deep, end discharge: 17'' x 11'', discharge height: 42'', liquid drain: 4'' (i-line sanitary fitting), motor: 1.5 hp, 220/440 volt, 4.5 to 22 output rpm approx., mechanical variable speed knob, stainless steel contact parts, previous use: food application, shipping information: 72'' wide x 144'' long x 90'' high, 2000 lbs(ID:8500, Mandatory Rigging Fee: $50.00)
Hayes & Stolz Ribbon/Paddle Blender, 15 Cubic Feet,manufacturer: Hayes & Stolz, model: EZ12-0309, interior blender dimensions: 13'' wide x 120'' long x 14'' deep, motor: 3 hp, 208.230/460 volt, 1760 RPM, reducer ratio: 35.79/1, final output rpm: 50 approx., end discharge: 8.5'' x 13'', previous use: food application, shipping dimensions: 48'' wide x 176'' long x 36'' high, *Note center shaft joint is carbon steel(ID:8502, Mandatory Rigging Fee: $50.00)
1750 Gallon Tank, 304 Stainless Steel, With Sweep Agitation, Electrically Heated,with insulation and electrically heated coil (115 volt), interior dimensions: 84'' diameter x 66'' straight side, dish top & cone bottom, top inlets: two 4'' tri-clamp, one 10'' flanged, center discharge: 6'' reduced to 2'', top manway with lid: 18'', top stainless steel bridge for mixer, side & bottom sweeper style mixer, motor: 7.5 hp, 460 volt, 1740 rpm, reducer ratio: 97.44/1, final output rpm: 18 approx., tank is on six stainless steel legs, all stainless steel construction, overall height with mixer: 12'8, shipping information: 7'4'' wide x 12'8'' long x 7'7'' high @3000 LBS(Subject to Confirmation)(ID:8471, Mandatory Rigging Fee: $50.00)
Simar-Dacon Bucket Elevator, 16' High,manufacturer: Simar-Dacon, single trunk design, stainless steel chain (new), carbon steel buckets (6.5'' x 9.5'' x 4.75'' deep), infeed height: 36'', discharge height: 144'' approx., motor: 2 hp, 575 volt, approximate overall dimensions: 70'' wide x 196'' high x 30'' deep, previous use: mineral application(Subject to Confirmation)(ID:8308, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 12'' Wide X 124'' Long, Cleated Belt, cleated belt dimensions: 12'' wide x 124'' long (32'' bottom straight side + 60'' inclination + 32'' top straight side), cleat depth: 1'', outfeed height: 47'', infeed height: 9'', distance between cleats: 12'', stainless steel frame, previous use : food application, distance from infeed to outfeed, horizontally: 118'' long, hydraulic motor, shipping information: 48'' wide x 124'' long x 56'' high @ 800 LBS, *moving dollies not included (ID:8523, Mandatory Rigging Fee: $50.00)
275 Gallon Tank (Vessel), 316 Stainless Steel,interior dimensions: 46'' diameter x 40'' straight side, dish bottom, top manhole: 18'' diameter, top inlet: two 2'' npt fitting, center discharge: 2'' npt fitting, with forklift tubes, previous use: pharmaceutical application, shipping information: 48'' wide x 56'' long x 78'' high(ID:8397, Mandatory Rigging Fee: $50.00)
Twin Shell Blender, 5 Cubic Feet,stainless steel contact parts, dimensions: 19'' diameter x ''36, discharge: 7.5'', motor: 2 hp, 208-230/460 volt, 1725 rpm, reducer ratio: 100:1, output rpm: 17 rpm approx., control box, start/stop button, overall dimensions: 96'' wide x 96'' long x 88'' high, blender is on a steel frame with casters, previous use: industrial application, manufacturer: believed to be Patterson Kelley(ID:9425, Mandatory Rigging Fee: $50.00)
1100 Gallon Stainless Steel Tank,interior dimensions: 69'' diameter x 72'' straight side, top manhole: 24'', center outlets: 1.5'' tri-clamp and 2'' tri-clamp, top inlets: 4'' hole, 4'' tri-clamp, 2 x 1.5'' tri clamp, top side inlet:1.5'' tri-clamp, 2'' tri-clamp with ball valve, bottom side outlet: 1.5'' tri-clamp, with lifting lugs, tank is on four stainless steel legs with pads, shipping information: 72'' wide x 96'' long x 72'' high(Subject to Confirmation)(ID:9472, Mandatory Rigging Fee: $50.00)
2100 Gallon Stainless Steel Tank,interior dimensions: 77'' diameter x 102'' straight side, top manhole: 24'', center outlets: 1.5'' tri-clamp and 2'' tri-clamp with ball valve, top inlets: 1 x 4'', 2 x 2'' tri-clamps, side inlet: 1 x 2'' tri-clamp, with lifting lugs(Subject to Confirmation)(ID:9473, Mandatory Rigging Fee: $50.00)
2100 Gallon Stainless Steel Tank,interior dimensions: 77'' diameter x 102'' straight side, top manhole: 24'', center outlets: 1.5'' tri-clamp and 2'' tri-clamp with ball valve, top inlets: 1 x 4'', 2 x 2'' tri-clamps, side inlet: 1 x 2'' tri-clamp, with lifting lugs(Subject to Confirmation)(ID:9475, Mandatory Rigging Fee: $50.00)
Unused 850 Gallon Tank, Stainless Steel,manufacturer: ross (2023), interior dimensions: 48'' diameter x 108'' straight side, flat bottom, bottom ports: one 4'', one 3'', top manway: 24'', top ports: two 3'', one 2'', four 1'', with lifting lugs, tank is on four legs with pads, overall height: 12', thickness: 6 gauge approx., like new, never put into service(ID:8190, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 8\" Diameter X 224'' Long,year of manufacture: 2023, unused, never put into service, inlet: 8.5'' x 18.5'', discharge: 7.5'', liquid discharge: 1'', carbon steel contact parts, *conveyor only, requires motor, *rated 500 kg/h with a 3 hp, 40 rpm motor(ID:8315, Mandatory Rigging Fee: $50.00)
110 Gallon Mixing Tank, 316 Stainless steel,interior dimensions: 38'' straight side x 29'' diameter, top entry mixer: 120 volts, with discharge Waukesha centrifugal pump: 1.5'' x 1.5'' model 2045, pump motor: 3 hp 208-230/460 volts, 3450 rpm, tank is mounted on steel trolley that can be used to transport the tank vertically or horizontally with casters on both sides, top inlet: 1'' npt 2'' npt, top side fitting: 1'' npt, bottom side fittings: 1'' npt, 1 1/2 npt, with central top load cell, center discharge: 1.5'' tri-clamp with ball valve, previous use : industrial application(ID:9705, Mandatory Rigging Fee: $50.00)
Incus Basket Centrifuge,manufacturer: Incus (2016), model: 037, serial no. 215.371-1, power requirements: 480 volt, 3 phase, top inlet: 8'', cone bottom discharge: 12'', liquid drain: 2'', clamp down lid & cone bottom, basket dimensions: 23'' diameter x 12'' deep, stainless frame dimensions: 55'' x 55'' x 87'' high, 304 stainless steel contact parts, previous use: quinoa application(Subject to Confirmation)(ID:7941, Mandatory Rigging Fee: $50.00)
Incus Basket Centrifuge,manufacturer: Incus (2016), model: 037, serial no. 215.371-1, power requirements: 480 volt, 3 phase, top inlet: 8'', cone bottom discharge: 12'', liquid drain: 2'', clamp down lid & cone bottom, basket dimensions: 23'' diameter x 12'' deep, stainless frame dimensions: 55'' x 55'' x 87'' high, 304 stainless steel contact parts, previous use: quinoa application(Subject to Confirmation)(ID:79411, Mandatory Rigging Fee: $50.00)
Progressive Recovery (PRI) Vacuum Distillation Unit,Manufacturer: Progressive Recovery (PRI) Vacuum Distillation Unit, Model: SCR-200E, Capacity: 75 gallons, 575V, explosion proof motors, With scraper system, 304 stainless steel construction on wetted surfaces, Exterior surfaces are sand blasted, primed and painted with a cross linked polyurethane, Electrical and mechanical temperature sensors, Self-contained internal heating oil and elements, Used for methanol and glycol vacuum distillation, Vacuum pump not included(Subject to Confirmation)(ID:8169, Mandatory Rigging Fee: $50.00)
300 Gallon Tank (Vessel), 316 Stainless Steel,mawp: 50 psi @ 100 deg. f., crn no. d-0631.6, dimensions: 48'' diameter x 30'' straight side, plus 10'' dish top & bottom, center discharge: 2'' with valve, reduced to 1.25'', side ports: two 1.5'', top ports: two 1'', two 0.75'', top manway with gasketed lid: 16'', with cip spray ball, with external level gauge, with grab handle, tank is on four stainless steel legs with locking casters, shipping information: 48'' wide x 60'' long x 92'' high @1000 LBS(ID:7056, Mandatory Rigging Fee: $50.00)
Sterilobe Rotary Lobe Pump, Model SLDL, 2 HP,capacity: up to 16 gpm approx., stainless steel gear casing, inlet & outlet: 2'' tri-clamp, motor : 2 hp, 575 volt, output rpm: 14 to 112 approx., with mechanical variable speed, mounted on a base (41'' x 41'') with casters, previous use: chocolate application, more information: https://www.vikingpump.com/pumps/sterilobe-series, stainless steel contact parts(ID:7692, Mandatory Rigging Fee: $50.00)
2641 Gallon Insulated Tank, 304 Stainless Steel,interior dimensions: 78'' diameter x 132'' straight side, cone bottom, center discharge: 1.5'' tri-clamp, top manhole with bolt down lid: 17.5'', top inlet: 1 x1.5'', 4 x 2'', 1 x 3'', 1 x 6'' tri-clamps, with CIP spray ball, mounted on four stainless steel legs with pads, with Mettler Toledo load cells, previous use: cosmetics application(Subject to Confirmation)(ID:9737, Mandatory Rigging Fee: $50.00)
275 Gallon Tank, 304 Stainless Steel,dimensions: 41.5'' diameter x 46'' straight side, open top tank with dish bottom, center discharge: 3'' tri clamp, four (4) stainless steel mixing baffles inside, tank is on four stainless steel legs with pads, overall height: 74'', previous use: paint application(ID:9741, Mandatory Rigging Fee: $50.00)
Donaldson Dust Collector,manufacturer: Donaldson Torit, with fan, fan motor: 5 hp, 208-230/460 volt, 3450 rpm, cartridge size: 21'' high x 15.5'' wide, discharge: 7'', top ports:2 x 6'', shipping information: 48'' wide x 108 '' long x 48'' high(ID:9747, Mandatory Rigging Fee: $50.00)
Donaldson Dust Collector,manufacturer: Donaldson Torit, model: VS550, with fan, fan motor: 1 hp, 208-230/460 volt, 3450 rpm, cartridge size: 10'' high x 16'' wide, top port: 6'', with collection pan: 21.5'' x 28'', shipping information: 48'' wide x 48 '' long x 60'' high(ID:9748, Mandatory Rigging Fee: $50.00)
275 Gallon Tank, 304 Stainless Steel,dimensions: 41.5'' diameter x 46'' straight side, open top tank with dish bottom, center discharge: 3'' tri clamp, four (4) stainless steel mixing baffles inside, tank is on four stainless steel legs with pads, overall height: 74'', previous use: paint application(ID:9757, Mandatory Rigging Fee: $50.00)
275 gallon SS Tank,dimensions: 41.5'' diameter x 46'' straight side, open top tank with dish bottom, center discharge: 3'' tri clamp, four (4) stainless steel mixing baffles inside, tank is on four stainless steel legs with pads, overall height: 74'', previous use: paint application(ID:9782, Mandatory Rigging Fee: $50.00)
Stainless steel bag dump station,stainless steel bag dump station(ID:80491, Mandatory Rigging Fee: $50.00)
Top-Flo Centrifugal Pump, 2\" X 1.5\", 7.5 HP,manufacturer: Top-Flo, model: C216-MD-21TC, inlet & outlet: 2'' x 1.5'' tri clamp, impeller diameter: 6'', stainless steel washdown motor: 7.5 hp, 230/460 volt, 3520 rpm, stainless steel contact parts, previous use: food application(ID:9469, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 14'' Diameter X 204'' Long, Tapered Screw,manufacturer: f.n. smith (2018), stainless steel screw : 14'' diameter x 204'' long, with pneumatic sliding gate valve, 18'' x 16'' inspection door with lid, side inlets: two 2'' tri-clamp, end discharge: 16'' x 16'', motor: 7.5 hp, 575 volt, 1750 rpm, reducer ratio: 27.84/1, previous use : pet food application, excellent condition, stainless steel contact parts, link to test video: https://www.youtube.com/watch?v=kVD3NZwlLfQ&ab_channel=Carter-WilsonEquipmentServicesInc., shipping information: 48'' wide x 225'' long x 48'' high @2000LBS(ID:7001, Mandatory Rigging Fee: $50.00)
Key Iso-Flo Vibratory Feeder, 36'' Wide X 204'' Long,manufacturer: key iso flo (2018), model: sh01-049023, feeder dimensions: 36'' wide x 204'' long, two vibrating motors: 1.1 kw, 460 volt, 890 rpm, top feed chute: 30'' x 16'', all stainless steel construction, previous use: food plant, *legs must be secured to base prior to use(ID:6759, Mandatory Rigging Fee: $50.00)
Un Dorner Belt Conveyor, 32'' Wide X 104'' Long, Cleated Belt, Adjustable Infeed Height, manufacturer: dorner, model: ultimate, cleated belt dimensions: 32'' wide x 104'' long, cleat depth: 1'', distance between cleats: 12'', stainless steel drip tray, stainless steel motor: 1 hp, 208.230/460 volt, 1750 rpm, stainless steel gearbox reducer, with stainless steel control box, pneumatic raise/lower capability, with stainless steel chute, mounted on a stainless steel frame with locking casters, with spare parts, conveyor is un, like new, link to test video: https://www.youtube.com/watch?v=68pjRpLJWgY&ab_channel=Carter-WilsonEquipmentServicesInc.(ID:7296, Mandatory Rigging Fee: $50.00)
300 Gallon Jacketed Tank, 316 Stainless Steel, With 85 HP Disperser, dimensions: 44'' diameter x 42'' straight side, plus dish bottom, center discharge: 2.5'' camlock, top man way with lid, top inlets: 10'', 8'', 3'', 2'', 1'', with top entry disperser/mixer, motor: 85 hp, 575 volt, 1200 rpm, with load cells, with control box, with mixing baffles, shipping information: 67'' wide x 144'' long x 67'' high @ 4500 lbs. (ID:7163, Mandatory Rigging Fee: $50.00)
Collette Planetary Multi-shaft Blender, 150 Liters,manufacturer: collette, model: mph-150, capacity: 150 liters, stainless steel jacketed bowl, bowl pressure rating: 15 psi, dimensions: 23'' diameter x 26'' deep, with lid, with control panel, spare lid, spare parts, previous use: cosmetics application, stainless steel contact parts(ID:7376, Mandatory Rigging Fee: $50.00)
Pall Centramate CM500S Tangential Flow Filtration System,serial no. 04.00275.01, max working volume (5 l), min working volume (170 ml), pressure range: 0 to 87 psi, temperature range: 0 to 45 deg.c (32 deg.f to 113 deg.f), flow rate: 15 to 600 l/hr, power requirements: 115 volt, refer to pdf product brochure for more information(ID:7580, Mandatory Rigging Fee: $50.00)
650 Gallon Jacketed Tank, 304 Stainless Steel, With 20 HP Mixer,high pressure jacket rated : 150 psi @ 428 deg.f, national board no. 1022, interior dimensions: 44'' diameter x 96'' straight side, plus dish bottom, center discharge: 6'' flanged, falk heavy duty top entry mixer, motor: 20 hp, 230/460 volt, 1740 rpm, final output rpm: 190 approx., tank weight: 9000 lbs approx., shipping information: 5'1'' wide x 15' long x 6'5'' high(Subject to Confirmation)(ID:7762, Mandatory Rigging Fee: $50.00)
Fanuc M-710ic 50 Palletizing Robot With Controller & Pendant,manufacturer: fanuc (2007), model: m-710ic/50, type: a05b-1125-b201, serial no. r07226582, axes: 6, payload: 50 kg, reach: 2050mm, repeatability: 0.03mm, with pendant, with fanuc r-j3ic controller, with base, with attachment, power supply: 575 volt, 3 phase(Subject to Confirmation)(ID:8129, Mandatory Rigging Fee: $50.00)
585 Gallon Tank, Stainless Steel, With Mixer & Pump,interior dimensions: 50'' diameter x 49'' straight side plus 40'' cone bottom, center discharge: 3'' with valve, open top, with top entry mixer with two marine style propellers, motor: 2.5 hp, 230/460 volt, 300 rpm approx., with two mixing baffles, with stainless steel centrifugal pump, 3'' x 2.5'' flanged inlet & outlet, motor: 6.5 hp, 230/460 volt, with level float, tank is on three stainless steel legs with pads, overall height: 140'', previous use: food application, shipping dimensions: 74'' wide x 144'' long x 60'' high @1000LBS(ID:7937, Mandatory Rigging Fee: $50.00)
500 Gallon Chester Jensen Jacketed Tank (Kettle), Stainless Steel, With Scrape Agitation,manufacturer: Chester Jensen, model: X70N50, center discharge: 4'' reduced to 2'' tri-clamp (with valve), with top entry scrape agitator, motor: 5 hp, 230/460 volt, 100 rpm approx., with stainless steel control panel, with variable speed drive, additional port for secondary mixer, previous use: food application, overall dimensions: 84'' x 70'' x 86'' high(Subject to Confirmation)(ID:8245, Mandatory Rigging Fee: $50.00)
Perrin Filter Press, Recessed Plate, Gasketed, 470 Mm X 470 Mm, Polypropylene,manufacturer: Perrin, capacity: 3 cubic feet approx., plate size: 470 mm x 470 mm, 14 polypropylene gasketed plates, one 2\" center hole, four 1.25\" corner holes(ID:8119, Mandatory Rigging Fee: $50.00)
Aro Drum Pump,manufacturer: Aro, model: NM2304B-41-311, max inlet pressure: 150 psi, mounted on cart with casters, previous use: cosmetics application(ID:8354, Mandatory Rigging Fee: $50.00)
150 Gallon Tank (Vessel), 316 Stainless Steel,vessel rated 25 psi @ 200 deg.f, national board no. 191, interior dimensions: 31'' diameter x 45'' straight side, top gasketed lid: 14.5'', dish bottom, center discharge, pipe to side: 0.75'', mounted on casters, with lifting lugs, previous use: pharmaceutical application, shipping dimensions: 48'' x 48'' x 66'' high, 750 lbs(ID:8393, Mandatory Rigging Fee: $50.00)
135 Gallon Tank (Vessel), 316 Stainless Steel,vessel rated 25 psi @ 200 deg.f, asme no. 269, interior dimensions: 30'' diameter x 37'' straight side, top gasketed lid: 14.5'', dish bottom, center discharge, pipe to side: 0.75'', mounted on casters, with lifting lugs, previous use: pharmaceutical application, shipping dimensions: 48'' x 48'' x 60'' high, 750 lbs(ID:8394, Mandatory Rigging Fee: $50.00)
Sterilobe Rotary Lobe Pump, Model SLCS,manufacturer: Sterilobe (Viking), model: SLCS, stainless gear casing, inlet & outlet: 1.5'' tri-clamp, pump head (front plate) jacketed for heating or cooling, max pressure: 50 psi, pump only, mounted on stainless steel frame, stainless steel contact parts(ID:7746, Mandatory Rigging Fee: $50.00)
FPEC Vacuum Tumbler, Model VT-85,manufacturer: FPEC, model: VT-85, serial no. 2853, capacity: up to 5000 lbs approx., interior tumbler dimensions: 65'' diameter x 72'' straight side, front load, motor: 10 hp, 575 volt, 1765 rpm, reducer ratio: 37.19/1, output rpm: 47 approx., 304 stainless steel contact parts, previous use: food application, shipping information: 7'10'' wide x 11'1'' long x 8'11'' high @ 8000 LBS(Subject to Confirmation)(ID:8509, Mandatory Rigging Fee: $50.00)
FPEC Vacuum Tumbler, Model VT-85,manufacturer: FPEC, model: VT-85, serial no. 2853, capacity: up to 5000 lbs approx., interior tumbler dimensions: 65'' diameter x 72'' straight side, front load, motor: 10 hp, 575 volt, 1765 rpm, reducer ratio: 37.19/1, output rpm: 47 approx., 304 stainless steel contact parts, previous use: food application, shipping information: 7'10'' wide x 11'1'' long x 8'11'' high @ 8000 LBS(Subject to Confirmation)(ID:8510, Mandatory Rigging Fee: $50.00)
Ribbon Blender,manufacturer: Amfec, model: 570, interior dimensions: 64'' wide x 96'' long x 48'' high, shipping information: 7'4'' wide x 11'8'' long x 8'7'' high, requires 40 HP motor, stainless steel contact parts, previous use: food application(Subject to Confirmation)(ID:8530, Mandatory Rigging Fee: $50.00)
2250 Gallon (300 Cu.Ft.) Tank (Hopper) with Blender & Rotary Valve, Carbon Steel,receiving hopper interior dimensions: 92'' diameter x 88'' deep, product inlet: 5'', hopper equipped with carbon steel blender, with carbon steel rotary valve, power requirements: 575 volt, with two Semco impactors, hopper has load cells (no controls), previous use: flour application, overall dimensions: 123'' x 126'' x 183'' high(ID:8371, Mandatory Rigging Fee: $50.00)
600 Gallon Pressure Tank (Vessel), Carbon Steel, Insulated,manufacturer: ATR Vessels (2019), model: RT-36132-125, mawp: 125 psi @ 250 deg.f, crn no. E00542.6, ports: 4'' flanged, 2'' npt with valve, insulated, overall dimensions: 36'' wide x 60'' long x 152'' high(ID:8435, Mandatory Rigging Fee: $50.00)
800 Gallon Jacketed Tank, Stainless Steel, With Scrape Agitation,high pressure dimple jacket, with top entry sweeper mixer with scrapper paddles (cone bottom portion only), motor: 5 hp, 575 volt, 1745 rpm, three interior doubled heating/cooling coils, one large heating/coil coil, interior dimensions: 58'' diameter x 48'' straight side, plus 48'' cone bottom, center discharge: 4'' with valve, with exterior insulation, open top, no lid, mounted in a carbon steel frame with pads, previous use: mineral processing, overall dimensions: 62'' x 62'' x 176'' high with motor(ID:8434, Mandatory Rigging Fee: $50.00)
5650 Gallon 304 Stainless Steel Tank,interior dimensions: 93'' diameter x 192'' straight side, manhole: 2 x 18'' with cover, top inlet: 2 x 7.5'' flange with 3'' hole, center discharge: 8'' flange with 2.5'' hole, overall dimensions: 106'' wide x 106'' long x 244'' high, shipping information: 106'' wide x 244'' long x 110'' high, 9000 LBS(ID:9412, Mandatory Rigging Fee: $50.00)
Rotating Drum Tumbler, 76" Diameter X 60" Long, 2000 lbs. Capacity, With Screw Conveyor, interior dimensions: 76'' diameter x 60'' deep, with baffles, opening: 36'' with cover, with control box with tumbler & screw conveyor, motor: 10 hp, 575 volt, tumbler weight empty: 8000 lbs. approx., contact parts : stainless steel, with stainless steel screw conveyor, polypropylene screw: 8'' diameter x 68'' long, mounted on a stainless steel frame with casters, discharge: 9'', infeed section: 45'' long, 115 volt motor, previous use: food application, link to test video: https://www.youtube.com/watch?v=pFKxfzH6ubA&ab_channel=Carter-WilsonEquipmentServicesInc., shipping information: 1 piece @ 40'' wide x 70'' long x 70'' high @600 LBS(ID:7528, Mandatory Rigging Fee: $50.00)
100 Gallon Tank, Stainless Steel, Insulated, interior dimensions: 32'' diameter x 26'' straight side, plus cone bottom, center discharge: 3'' tri-clamp, bottom cone side port: 1'', ports: three 3'', two 2'', 1'', interior separator, open top with lid, tank is insulated, cip spray ball inside lid, overall dimensions: 55'' x 43'' x 51'' high, previous use: food application(ID:7975, Mandatory Rigging Fee: $50.00)
50 Gallon Breddo Likwifier, 25 HP,manufacturer: Breddo Likwifier, model: LOR, serial no. D19576-3. 98289, capacity: 50, with additional cutting knife, with mixing baffle, motor: 25 hp, 575 volt, 1765 RPM, cone bottom with center discharge: 2.5'' tri-clamp, with butterfly valve, reduced to 2'' tri-clamp, top inlets: 2 x 2'' tri-clamps, tank dimensions: 30'' diameter x 22'' straight side, manhole 18'' with lid and gasket, shipping information: 48'' wide x 66'' long x 68'' high @1000 LBS, previous use: food application(ID:9477, Mandatory Rigging Fee: $50.00)
Sandpiper Diaphragm Pump, 1.5\" X 1.5\",manufacturer: Sandpiper, model: S15B1SGTANS000, capacity up to 106 gpm, inlet & outlet: 1.5'' npt to tri-clamp(ID:9660, Mandatory Rigging Fee: $50.00)
Waukesha Rotary Lobe Pump, Model 18, 2 HP,manufacturer: Waukesha, model: 18, capacity: 0 to 5.4 gpm approx, inlet & outlet: 1.5'' tri-clamp, motor: 2 hp, 230/460 volt 1725 rpm, with mechanical variable speed, fixed gear ratio 9.3:1, max rpm 185 with current motor, previous use: industrial manufacturing, stainless steel contact parts, shipping dimensions: 4' x 4' x 3' high, 750 lbs(ID:9661, Mandatory Rigging Fee: $50.00)
Waukesha Rotary Lobe Pump, Model 30, 1 HP,manufacturer: Waukesha (USA), model: 30, capacity: 5.27 gpm approx., inlet & outlet: 1.5'' tri-clamp, motor: 1 hp, 230/460 volt, 1650 RPM, output rpm: 87.8 output approx., pump is on a steel base, previous use: food application, stainless steel contact parts, shipping information: 48'' wide x 48'' long x 30'' high @500 LBS(ID:9663, Mandatory Rigging Fee: $50.00)
35 Gallon Jacketed Tank (Reactor) with Homogenizer, 316 Stainless Steel,jacket pressure rated: 100 psi @ 300 deg.f, vessel internal pressure rating: 100 psi @ 300 deg.f, Emi Incorporated Homogenizer, Serial No. C10394, model no. XP 7.5, motor: 7.5 hp, 208-230/460 volts, 3450 rpm, inlet: 2 x 1'' npt style fittings, 4'' inspection port, center discharge. 1.5'' reduced 1'' npt style fitting, interior dimensions: 19'' diameter x 28.8'' straight side, shipping information: 48'' wide x 48'' wide x 86'' high, 1500 lbs(ID:9706, Mandatory Rigging Fee: $50.00)
100 Gallon Jacketed Tank (Kettle), With Scrape Agitation, 304 Stainless Steel,manufacturer: Waukesha / Cherry-Burrell, interior dimensions: 36'' diameter x 25'' straight side, center discharge: 2'' tri-clamp, top inlets: 2'' tri-clamps, with top entry scrape agitator, motor: 1.5 hp, 230 volt, with stainless steel control panel, with variable speed drive, max speed: 18 rpm, shipping information: 56'' wide x 86'' long x 94'' high @2500 Lbs, previous use: food application(Subject to Confirmation)(ID:9707, Mandatory Rigging Fee: $50.00)
400 Gallon Jacketed Tank (Reactor), With Waukesha Pump & Load Cells, 316 Stainless Steel,jacket rated 30 psi @ 200 deg.f, vessel rated 25 psi @ 200 deg.f, equipped with Waukesha rotary lobe pump, model 64, capacity: 22 gpm approx., motor: 10 hp, 460 volt, 141 rpm, equipped with Mettler Toledo load cells, with stainless steel control panel, interior diameter: 40'' diameter x 72'' straight side, top inlets: 5 x 1.5'', 3 x 2'' 1 x 5.5'' on manhole cover, tri-clamps, discharge pump outlet: 2.5'' tri-clamp, previous use: food application, mobile system including integrated forklift tubes and casters to lay the unit over for easy handling, shipping information: 65'' wide 163'' long x 86 in high, requires flatbed(Subject to Confirmation)(ID:9708, Mandatory Rigging Fee: $50.00)
Sine pump with floor scale,inlet & outlet: 3'' tri-clamp, motor: 266/460v, 1720 rpm, 7.5 hp, gearbox ratio: 8.22, max output rpm: 209 approx, with Lenze AC Tech VFD, with Avery Weigh-Tronix floor scale model: FCQS4848-05, scale capacity: 5000 LBS, scale dimension: 48'' x 48'', overall dimensions: 72'' x 72'' x 62'' high(ID:9709, Mandatory Rigging Fee: $50.00)
A&M Process Equipment Double Cone Blender, 10 Cubic Feet, With Safety cage,manufacturer: A&M Process Equipment LTD., model: ACB100DL, motor: 575 volts, 3 hp, 65 rpm, with motor speed controller, motor is equipped with electric brake, outlet: 9.5'', top inlet: 18'', straight side 12'' x 40'' diameter, cone top: 12' height x 18'' top diameter x 40'' bottom diameter, cone height 15'' x 40'' top diameter x 9.5'' bottom diameter, with butterfly valve, with control panel, blender is equipped with air powered lift for barrels for offloading, comes with safety cage, total volume is 143 US gallons, previous use: pharmaceutical application, shipping information: 78'' wide x 96'' long x 102'' high(Subject to Confirmation)(ID:9731, Mandatory Rigging Fee: $50.00)
26 Gallon Jacketed Tank (Reactor), Stainless Steel,manufacturer: DCI, jacket pressure rating: 150 psi @ 365 deg.f, vessel interior pressure rating: 45 psi @ 300 deg.f, national board no. 3718, with CIP spray ball, dimensions: 20'' diameter x 22'' straight side, center discharge: 1.5'' tri-clamp, top inlets: one 6'' center, five 1.5'', one 3.5'', bottom side port: two 0.5'', one 1.5'', with probe, previous use: pharmaceutical application, shipping information: 48'' x 48'' x 66'' high, 750 lbs(ID:8548, Mandatory Rigging Fee: $50.00)
10 Gallon Feldmeier Tank (Vessel), 316 Stainless Steel, with Mixer,manufacturer: Feldmeier, vessel mawp: 60 psi @ 300 deg.f, rated full vacuum, with national board number, stainless steel washdown motor : 1 hp 230/460 volt, 3450 rpm, stainless steel gearbox reducer : 10/1, output rpm: 345 approx., with variable speed drive, with stainless steel control panel, sanitary interior polish, with probe, interior dimensions: 14'' diameter x 14'' straight side, top ports: 3'', 2.5'', 2'', three 1.5'', discharge port: 2.5'' & 1.5'', mounted on casters, previous use: pharmaceutical application, shipping information: 48'' x 48'' x 68'' high, 750 lbs(ID:8537, Mandatory Rigging Fee: $50.00)
Fortress Phantom Metal Detector with Belt Conveyor & Label Applicator,manufacturer: Fortress Technology, model: Phantom, aperture size: 12'' long x 3'' high, power requirements: 120v, belt dimensions: 12'' wide x 76'' long, mounted on stainless steel frame and casters, infeed / outfeed height: 38'' high, with label applicator, shipping information: 48'' wide x 84'' long x 76'' high, 500 lbs(ID:9406, Mandatory Rigging Fee: $50.00)
VibraScrew Screw Conveyor (Feeder), 2'' Diameter X 18'' Long, manufacturer: Vibra Screw, screw dimensions: 2'' diameter x 18'' long, top feed hopper: 12'' x 18'' x 24' deep, feed height: 45'', stainless steel motor: 0.5 hp, 90 volt DC, 1750 rpm, stainless steel gearbox reducer, discharge: 2'', discharge height: 10'', with vibra screw vibrator: 0.2 hp, 110-115 volts, 3600 rpm, stainless steel contact parts, previous use: food application(ID:9458, Mandatory Rigging Fee: $50.00)
Waukesha Rotary Lobe Pump, Model 60, 3 HP,manufacturer: Waukesha (USA), model: 60, capacity: 62 gpm approx., inlet & outlet: 2.5'' tri-clamp, motor: 3 hp, 575 volt, 1770 RPM, output rpm: 407 output approx., pump is on a stainless steel base, previous use: food application, stainless steel contact parts, shipping information: 48'' wide x 56'' long x 30'' high @1000 LBS(ID:9461, Mandatory Rigging Fee: $50.00)
Russell Compact Sieve, 16'' Diameter, Stainless Steel,manufacturer: Russell Compact Sieve, model: 27400, vibrating motor: 230/460 volts, 1800 rpm, 0.13 hp, mounted onto stainless steel cart with casters, comes with two 18M screens, previous use: pharmaceutical application, shipping information: 48'' wide x 48'' long x 60'' high(ID:9738, Mandatory Rigging Fee: $50.00)
Stainless steel tote,dimensions: 48'' diameter x 18'' straight side, plus 50'' cone bottom, top manway: 13.5'' with lid, center discharge: 10'' with valve, mounted in stainless steel frame, overall dimensions: 50'' wide x 50'' long x 82'' high, previous use: food application(ID:9749, Mandatory Rigging Fee: $50.00)
Stainless steel tote,dimensions: 48'' diameter x 18'' straight side, plus 50'' cone bottom, top manway: 13.5'' with lid, center discharge: 10'', mounted in stainless steel frame, overall dimensions: 50'' wide x 50'' long x 82'' high, previous use: food application(ID:9750, Mandatory Rigging Fee: $50.00)
Stainless steel tote,dimensions: 48'' diameter x 18'' straight side, plus 50'' cone bottom, top manway: 13.5'' with lid, center discharge: 10'' with valve, mounted in stainless steel frame, overall dimensions: 50'' wide x 50'' long x 82'' high, previous use: food application(ID:9751, Mandatory Rigging Fee: $50.00)
Stainless steel tote,dimensions: 59'' diameter x 21'' straight side, plus 42'' cone bottom, top manway: 24'' with lid, center discharge: 9'' with pneumatic valve, mounted in stainless steel frame with forklift channels, overall dimensions: 60'' wide x 60'' long x 78'' high, previous use: food application(ID:9752, Mandatory Rigging Fee: $50.00)
Stainless steel tote,dimensions: 59'' diameter x 21'' straight side, plus 42'' cone bottom, top manway: 24'' with lid, center discharge: 9'' with pneumatic valve, mounted in stainless steel frame with forklift channels, overall dimensions: 60'' wide x 60'' long x 78'' high, previous use: food application(ID:9753, Mandatory Rigging Fee: $50.00)
Siebtechnik Jacketed Short Bowl Decanter Centrifuge,manufacturer: Siebtechnik, model: short bowl decanter, type: sbd-210, serial no. 7287, max drum speed: 5000 rpm, with control panel, with 8'' orbniox stainless steel valve, with stainless steel support frame, includes manufacturers drawings, data sheets & manuals, equipment refurbished by manufacturer 2020, stainless steel contact parts(Subject to Confirmation)(ID:7066, Mandatory Rigging Fee: $50.00)
Premier Submersible Media Mill, Model PSM 7,manufacturer: premier mill, model: psm-7 submersible media mill, two motors: 3 hp (mill) & 2 hp (mixers), 575 volt, with variable speed drives, stainless jacketed bowl, independently controlled mixers & milling shaft(ID:7934, Mandatory Rigging Fee: $50.00)
Un Belt Conveyor, 12'' Wide X 95'' Long , Variable Speed,belt dimensions: 12'' wide x 95'' long, motor: 0.5 hp, reducer ratio: 30 to 1, with variable speed motor controller with quick connect plug, output rpm: 1, 58 approx., power requirements: 115 volt, with adjustable side rails, belt height from floor: 36'', stainless steel frame with pads, un(ID:7962, Mandatory Rigging Fee: $50.00)
Julabo FP51-SL Ultra-Low Refrigerated / Heating Circulator, manufacturer: Julabo, model: FP51-SL, power requirements: 208/230 volt, with digital user interface controller As per manufacturer: Cooling Capacity (Ethanol): deg. C: 20, 0, 20, 40 kW: 2, 1.5, 1, 0.26 Refrigerant Stage 1 Filling volume: 29.28 oz (830 g) Carbon dioxide equivalent t: 3.308 Cooling of compressor: 1-stage air External pt100 sensor connection: Integrated Integrated programmer: 6 x 60 steps Temperature control: ICC Absolute temperature calibration: 3 point calibration Temperature display: VFD + LCD Temperature setting: Keypad Setting the resolution of the temperature display: 0.01 deg. C Working range:, 51 to 200 deg. C Stability: +/- 0.05m deg. C Ambient: 5 to 40 deg. C Temperature display resolution: 0.01 deg. C Bath Cover: Integrated Filling volume: 7.5 to 12 L Usable bath opening: 4.7 x 7.1/7.9" (11.94 x 18.03/20.066 cm) Weight198.4 lbs. (90 kg)(Subject to Confirmation)(ID:8294, Mandatory Rigging Fee: $50.00)
MBraun Glovebox Workstation,manufacturer: MBraun, glovebox max pressure: 20 mbar, min pressure, 20 mbar, Antechamber total vacuum: 10-3 mbar, single sided, five (5) ambidextrous glovebox workstation, with touchscreen controller, with Edwards RV12 vacuum pump and oil mist filter, with safety blower, with hepa filter, with operating instructions and manual(Subject to Confirmation)(ID:8305, Mandatory Rigging Fee: $50.00)
Lee Industries 30 Gallon Kettle, Stainless Steel, With Mixer,jacket rated: 100 psi @ 338 deg.f, interior dimensions: 23'' diameter x 20'' deep, open top with lid, discharge 1.5'' tri-clamp with stainless steel ball valve, with lightnin clamp-on mixer, model: xj-43, 10'' diameter stainless steel marine style propeller, motor: 0.43 hp, 208.220/440 volt, 1725 rpm, with two variable speed drives, mounted on a stainless steel cart with casters, previous use: food application(ID:7167, Mandatory Rigging Fee: $50.00)
Lee Industries 66 Gallon Tank (Vessel), 316 Stainless Steel,mawp: 35 psi @ 275 deg.f, national board no. 4909, interior dimensions: 30'' diameter x 20'' straight side, center discharge: 1.5'', top inlets: six 1.5'', with gasketed lid: 14'', dish top and bottom, with top entry mixer (no motor), vessel rated for vacuum service, with stainless steel grab handles, vessel mounted on locking casters, previous use: pharmaceutical application(ID:7372, Mandatory Rigging Fee: $50.00)
Gea Rotary Air Lock Valve, 14'' X 5'', CIP, manufacturer: gea, model: cv 1250 dem, inlet: 14'' diameter, outlet: 5'' tri-clamp, blow through, housing and blade material: stainless steel, with slide rails for clean in place design, *requires motor(ID:8049, Mandatory Rigging Fee: $50.00)
Alfa Laval Contherm Scraped Surface Heat Exchanger, manufacturer: alfa laval, model: contherm 6x6, serial no. hc7446ncc, shell interior dimensions: 6'' diameter x 72'' long, product chamber mawp: 300 psi @ 300 deg f., media chamber mawp: 250 psi @ 300 deg. f, product inlet & outlet: 2'' tri-clamp, motor: 15 hp, 575 volt, 104 output rpm approx., stainless steel scraper blades, with hydraulic pump, motor: 0.5 hp, 575 volt, 3450 rpm, previous use: food application, shipping information: one skid 48'' wide x 120'' long x 30'' high 1000 pounds(Subject to Confirmation)(ID:7725, Mandatory Rigging Fee: $50.00)
158 Gallon Tank (Vessel), 316L Stainless Steel,vessel interior pressure rating: 60 psi @ 350 deg.f, rated full vacuum, national board no. 600, top manway with lid: 25'', interior dimensions: 40'' diameter x 32'' straight side, plus dish top & bottom, top inlets: one 4'', one 2'', three 1.5'', center discharge: 1.5'' tri-clamp, possibility of adding an undermount magnetic drive mixer, 316L stainless steel construction, with cip spray ball, mounted onto stainless steel cart with casters, with lifting lugs, previous use: cannabis application(ID:8278, Mandatory Rigging Fee: $50.00)
264 Gallon Jacketed Tank (Reactor), 316L Stainless Steel, Insulated, Full Vacuum,two zone jacket rated: 100 psi @ 300 deg.f, vessel mawp: 50 psi @ 300 deg.f, rated full vacuum, crn no. R5150.5, insulated, with pressure rated sight glass type manway, sanitary interior polish, with bottom mount agitator (requires motor), top inlets: one 4'', two 3'', five 2'', four 1.5'', center discharge: 3'', dish top & bottom, with top cip spray ball, with temperature probe, tank is on three stainless steel legs with pads, with lifting lugs, previous use: cannabis application, weight empty: 1274 lbs, shipping dimensions: 48'' wide x 55'' long x 90'' high @1500 LBS(ID:8275, Mandatory Rigging Fee: $50.00)
25 Gallon Lee Industries Tank,interior dimensions: 18'' diameter x 23'' straight side, center discharge: 1.5'' tri-clamp, with ball valve, discharge height: 11.5'', with bracket for clamp-on mixer, open top with lid, kettle is on four stainless steel legs with locking casters, previous use: pharmaceutical application, shipping information: 48'' wide x 48'' long x 48'' high @ 300 pounds(ID:8538, Mandatory Rigging Fee: $50.00)
Lee Industries 55 Gallon Jacketed Tank, Stainless Steel,manufacturer: Lee Industries (USA), model: 55 dp, high pressure jacket: 100 psi @ 338 deg.f, center discharge: 1.5'' tri-clamp, with jacket fittings, with clamp down lid, with bracket for clamp on mixer, with grab handle, sanitary polish, interior dimensions: 20'' diameter x 40'' straight side, shipping information: 40'' x 48'' x 68'' high, 500 lbs(ID:8543, Mandatory Rigging Fee: $50.00)
Use Lee reactor, reactor working capacity: 400 liters, jacket pressure rating: 90 psi @ 351 deg. f, vessel mawp: 45 psi @ 351 deg. f, vessel rated full vacuum, national board no. 10048, sanitary interior mirror polish, heavy duty bolt down lid, interior dimensions: 36'' diameter x 21'' straight side, plus dish top & bottom, top inlets: 6 x 3'', 3 x 1.5'', 1 x 2'' tri-clamps, center discharge: 3'' tri-clamp with valve, 6'' sight glass, with probe, with pressure gauge, with two top cip spray balls, with lifting lugs, tank is on four stainless steel legs with casters, overall height: 67'', previous use: cosmetic application, shipping information: 48'' wide x 48'' long x 67'' high @1000 LBS(Subject to Confirmation)(ID:9760, Mandatory Rigging Fee: $50.00)
Viking Rotary Lobe Pump, Model R2S,manufacturer: Wrighflow / Viking, model: R2S, inlet & outlet: 1.5'' tri-clamp, pump only, stainless steel contact parts(ID:7751, Mandatory Rigging Fee: $50.00)
SPX Rotary Lobe Pump, Model 60-U1, 5 HP,capacity: 50 gpm approx., inlet & outlet: 2.5'' tri-clamp, motor: 5 hp, 575 volt, 1720, output rpm: 330 output approx., pump is on a stainless steel base with stainless steel motor cover, previous use: recycling application, stainless steel contact parts(ID:8414, Mandatory Rigging Fee: $50.00)
550 Gallon Tank (Reactor), 316 Stainless Steel, Full Vacuum, vessel mawp: 50 psi @ 300 deg. f, vessel rated full vacuum, national board no. 215, crn no. l8654.5, sanitary interior polish, interior dimensions: 48'' diameter x 64'' straight side, plus dish top & bottom, center discharge: 2'' tri-clamp with valve, 18'' manway, with clamp down lid & gasket, with level gauge, insulated, with two top cip spray balls, with temperature probe, tank is on four stainless steel legs with pads, overall height: 128'', previous use: pharmaceutical application, shipping information: 58'' wide x 128'' long x 60'' high @2000 LBS(ID:7482, Mandatory Rigging Fee: $50.00)
150 Gallon Jacketed Tank, 304 Stainless Steel, With Scrape Agitation, jacket pressure rating: 80 psi @ 300 deg. f, national board no. 324, interior dimensions: 37'' diameter x 37'' deep, center discharge: 1.5'' tri-clamp, with top entry scrape agitator, motor: 3 hp, 230/460 volt, 25 rpm approx., additional port on bridge for secondary agitator, kettle is on three stainless steel legs with pads, bolted on frame with forklift tubes, previous use: food application, overall dimensions: 52'' wide x 49'' long x 94'' high(ID:8279, Mandatory Rigging Fee: $50.00)
VibraScrew AccuFeed Screw Conveyor (Feeder), 2'' Diameter X 22'' Long,manufacturer: Vibra Screw, model: AccuFeed, serial no. 2021188, capacity: 23 sq.ft./hour approx., with Vibra Screw control panel including versifeeder controller, screw dimensions: 2'' diameter x 22'' long, top feed hopper: 12'' x 12'' x 12'' deep, top inlet: 4'', discharge: 2.5'', motor: 0.75 hp, 208-230/460 volt, 1750 rpm, previous use: food application(ID:8312, Mandatory Rigging Fee: $50.00)
250 Gallon Tank (Reactor), 316 Stainless Steel, With Air Mixer, mawp: 14.5 psi @ 210 deg. f, serial no. 1814690301H, sanitary interior polish, interior dimensions: 41.5'' diameter x 36'' straight side, plus dished ends, slope bottom to end discharge: 1.5'' tri-clamp, with top mount air mixer, 16'' sight glass manway, with cip spray ball, top inlet: 1.5'', with lifting lugs, mounted on forklift channels, un, never put into service, 316 stainless steel contact parts(ID:8321, Mandatory Rigging Fee: $50.00)
Hobart Vertical Cutter Mixer, Model HCM-300,manufacturer: Hobart, model: HCM 300-serial number: 31-234-802, capacity: 30 QT, motor: 5 hp, 208 volt, 1140 rpm, previous use: food application(ID:8341, Mandatory Rigging Fee: $50.00)
Fortress Stealth Metal Detector,manufacturer: Fortress Technology, model: Phantom, aperture size: 22'' long x 8'' high, power requirements: 120v, with pneumatic retractable conveyor end (rejector), with stainless steel chute, mounted on stainless steel frame and casters, infeed height: 10'' high, outfeed height: 45'' high, equipped with stainless steel motor: 1/2 hp, 208-203/460 volts, 1760 rpm, shipping information: 48'' wide x 144'' long x 78'' high, 1500 lbs, ***Conveyor requires belt(ID:8528, Mandatory Rigging Fee: $50.00)
Lee Industries 40 Gallon Jacketed Tank, Stainless Steel,jacket rated: 100 psi @ 338 deg.f, national board no. 8081, center discharge: 1.5'' with valve, two inlets: One 3'', two 1.5'', interior dimensions: 24'' diameter x 19'' straight side, with lid, with stainless steel grab handles, mounted casters, previous use: pharmaceutical application, shipping information: 48' x 48'' x 55'' high, 750 lbs(ID:8541, Mandatory Rigging Fee: $50.00)
350 Gallon Tank (Reactor), 316L Stainless Steel, Insulated & Full Vacuum, mawp: 50 psi @ 300 deg. f, rated full vacuum, national board no. 9316, crn no. l8811.5, sanitary interior polish, interior dimensions: 44'' diameter x 48'' straight side, plus dish top & bottom, center discharge: 2'' tri-clamp, 18'' manway, with clamp down lid & gasket, with two top cip spray balls, with level gauge, with lifting lugs, tank is on four stainless steel legs with pads, overall height: 112'', previous use: pharmaceutical application, *reactor has impeller, would require a 0.75 hp magnetic motor drive, shipping information: 48'' wide x 118'' long x 54'' high @1500 LBS(ID:7488, Mandatory Rigging Fee: $50.00)
250 Gallon Tank (Reactor), 316 Stainless Steel, Full Vacuum, With Agitator,mawp: 50 psi @ 300 deg.f, rated full vacuum, national board no. 196, crn no. l8107.5, sanitary interior polish, interior dimensions: 36'' diameter x 45'' straight side, plus dish top & bottom, center discharge: 2'', with bottom mount agitator, motor: 0.75 hp, 575 volt, 3500 rpm, output rpm: 500 approx., clamp down lid with gasket, with level gauge, with temperature probe, insulated, with lifting lugs, tank is on four stainless steel legs, previous use: pharmaceutical application, shipping information: 48'' wide x 102'' long x 50'' high @1500 LBS(ID:7487, Mandatory Rigging Fee: $50.00)
3M Adjustable Case Sealer, 700A,manufacturer: 3M, model 700A, box weight capacity: up to 85 lbs, boxing capacity : up to 30 boxes per minute (depending on length), minimum box dimensions: 6'' wide x 6'' long x 4.8'' high, maximum box dimensions: 21.5'' wide x unlimited length x 21.5'' high, tape minimum : 1.5'' wide, tape maximum: 2'' wide, tape exterior maximum: 16''(ID:8057, Mandatory Rigging Fee: $50.00)
3M Adjustable Case Sealer, 700A,manufacturer: 3M, model 700A, box weight capacity: up to 85 lbs, boxing capacity : up to 30 boxes per minute (depending on length), minimum box dimensions: 6'' wide x 6'' long x 4.8'' high, maximum box dimensions: 21.5'' wide x unlimited length x 21.5'' high, tape minimum : 1.5'' wide, tape maximum: 2'' wide, tape exterior maximum: 16''(ID:8061, Mandatory Rigging Fee: $50.00)
3M Adjustable Case Sealer, 700A,manufacturer: 3M, model 700A, box weight capacity: up to 85 lbs, boxing capacity : up to 30 boxes per minute (depending on length), minimum box dimensions: 6'' wide x 6'' long x 4.8'' high, maximum box dimensions: 21.5'' wide x unlimited length x 21.5'' high, tape minimum : 1.5'' wide, tape maximum: 2'' wide, tape exterior maximum: 16''(ID:8062, Mandatory Rigging Fee: $50.00)
Stainless Steel Feeder, 18'' Wide X 40'' Long,stainless steel decline feeder: 18'' wide x 40''long, stainless steel feed hopper: 28'' x 30'' x 24'' deep, pneumatic discharge gate, end table: 20'' x 23'', stainless steel frame with casters, previous use: food application(ID:7837, Mandatory Rigging Fee: $50.00)
Shick Rotary Air Lock Valve, 8\" X 8\",manufacturer: shick, model: t225, inlet: 8'', outlet: 8'' x 8'', housing material: carbon steel, blade material: carbon steel, motor: 0.5 hp, 208.230/460 volt, 1140 rpm (missing fan cover), reducer ratio: 60/1, output rpm: 19 approx., previous use: food plant(ID:6527, Mandatory Rigging Fee: $50.00)
Fristam Centrifugal Pump, 3\" X 2.5\", 7.5 HP,inlet & outlet: 3'' x 2.5'' tri clamp, motor: 7.5 hp, 230/460 volt, 1760 rpm, previous use: food application, stainless steel contact parts(ID:6799, Mandatory Rigging Fee: $50.00)
Five Allen Bradley Power Flex70 Variable Frequency Drives (480 Volt),manufacturer: allen bradley, model: powerflex70, four (4) 1 hp, 480 volt, one (1) 5 hp, 480 volt(ID:6981, Mandatory Rigging Fee: $50.00)
20 Gallon Tank, Stainless Steel, Epoxy Coated,manufacturer: feldmeier, interior dimensions: 18'' diameter x 25'' straight side, slope bottom to end discharge: 1'', open top (no lid), with bracket for clamp-on mixer, with stainless steel grab handles, tank mounted on locking casters, overall height: 49'', previous use: pharmaceutical application(ID:7350, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 54// Wide X 70'' Long, Cleated Belt With CIP Spray Bar, food grade plastic belt, cleated belt dimensions: 54'' wide x 70'' long, infeed/discharge height: 52', retractable stainless steel side guards, with cip spray bar, stainless steel motor: 0.5 hp, 575 volt, 1750 rpm, stainless steel gearbox reducer, mounted on a stainless steel frame, previous use : food application(ID:7668, Mandatory Rigging Fee: $50.00)
Patterson Jacketed Ribbon Blender, 120 Cubic Feet,manufacturer: patterson, serial no. 80ca4619.1, total capacity: 120 cu.ft. approx, working capacity: 80 cu.ft. approx., jacket rating: 15 psi, interior blender dimensions: 48'' wide x 144'' long, top ports: 18'', 12'', blender is insulated, motor for hazardous locations: 15 hp, 575 volt, 870 rpm, with lifting lugs, shipping weight: 12, 000 lbs approx., previouse use: chocolate application, carbon steel contact parts, shipping information: 5'5'' wide x 14' long x 6'1'' high(ID:7711, Mandatory Rigging Fee: $50.00)
Probat-Werke Rotary Air Lock Valve, 10\" X 10\",manufacturer: probat-werke, model: 46 dn 250-1, inlet & outlet: 10'', housing material: carbon steel, blade material: carbon steel, motor: 1 hp, 230/460 volt, 20 output rpm approx., previous use: food plant(ID:8050, Mandatory Rigging Fee: $50.00)
Screw Conveyor / Lump Breaker, 21'' Diameter X 36'' Long, Twin Screws,twin screw conveyors that convert into lump breakers, inlet: 21'' x 36'', xp motor: 5 hp, 575 volt, 66 rpm approx., two 8'' discharges, carbon steel contact parts, previous use: food application(ID:8373, Mandatory Rigging Fee: $50.00)
Semco Rotary Air Lock Valve, 8\" X 8\",manufacturer: Semco, inlet & outlet: 8'', housing material: carbon steel, blade material: carbon steel, xp motor: 0.5 hp, 575 volt, 1750 rpm, reducer ratio: 39.62/1, previous use: food plant(ID:8377, Mandatory Rigging Fee: $50.00)
Vibratory Feeder, With Magnet,top feed hopper: 24'' x 24'' x 24', plus 16'' deep cone bottom, 115 volt power requirement, with magnetic fingers at discharge, vibratory feeder: 4'' wide x 20'' long, with integrated forklift tubes, carbon steel contact parts, previous use: industrial manufacturing(ID:9670, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 7.5'' Wide x 38'' Long, belt dimensions: 7.5'' wide x 38'' long, charge / discharge height: 30'' high, motor: 120 volt, with variable speed motor controller, stainless steel frame, previous use: food application(ID:9723, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 13'' Wide X 115'' Long, Variable Speed, food grade plastic belt with cleats, discharge height: 68'', stainless steel drum motor: 0.75 hp, 460 volt, variable speed, with allen bradley variable frequency drive, with quick 480 volt connect plug, with foot switch, stainless steel frame mounted on casters, with adjustable legs, previous use: food application(ID:6836, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 42'' Wide X 111'' Long, belt dimensions: 42'' wide x 111'' long, infeed / discharge height: 38'' high, motor: 2 hp, 575 volt, 40 rpm approx., with stainless steel control panel, stainless steel frame with casters, previous use: food application(ID:7731, Mandatory Rigging Fee: $50.00)
HAF Screw Conveyor (Feeder), 5'' Diameter X 82'' Long, With Agitator, manufacturer: HAF Equipment, model: VTF600FG, feed port inlet: 12.5', flanged discharge: 6'', with paddle style agitator, previous use : food application, construction material: stainless steel, feeder & agitator only, requires motor/gearbox(ID:8132, Mandatory Rigging Fee: $50.00)
Scepter Cross Membrane Filtration System, manufacturer: scepter (2001), model: 14C-750A-10P4, serial no. 01-1214, national board no. 1178, shell side mawp: 150 psi @ 250 deg. f, number of tubes : 140, 12'6'' long, 18'' shell diameter, inlets & outlets: 2', sanitary/bevel thread, previous use: food application, shipping dimensions: 36'' wide x 156' long x 60'' high, 2000 lbs., *missing one caster As per manufacturer: Scepter Micro/Ultrafiltration System Graver's Scepter Microfiltration/Ultrafiltration systems represent the ultimate filtration solution for demanding applications with difficult process conditions or streams with high solids or viscosity. The Scepter' UF module is a cross-flow stainless steel membrane, constructed of porous stainless steel tubes which are coated with a unique titanium dioxide membrane. The result is a MF/UF system which performs regardless of the extreme pressures, pH and temperature. Highlights, Robust microfiltration/ultrafiltration: Constructed of stainless steel and titanium, our 0.1 or 0.02 micron filter prevents particle penetration and plugging and operates in the most challenging applications., Leak Free, Gasket-free, all welded construction gives outstanding mechanical stability, High Solids Content, Large diameter tubes handle up to 50% suspended solids by volume., Full pH Range, Operates the entire pH range of 0-14, High temperature compatible able to operate continuously up to 600 deg F / 315 deg C., Steam Sanitizable, Can easily be steam sanitized with no negative effects., High pressure capability up to 1, 000 psig / 70 bar., Chemical Compatibility, Easily withstand chemical sanitization, aggressive caustic and acid cleaning agents, Flexible Configuration, Can operate in either horizontal or vertical orientation. Prima-Sep Advantages and Benefits How it works, Continuous Operation, The Scepter system is fed from a customer supplied buffer tank. The Scepter feed pump pressurizes feed to greater than 100 psig and injects it into a circulation loop that provides circulation cross-flow in the Scepter microfiltration tubes. Filtrate is produced on exit of the module shells while the Concentrate is released through a flow regulating valve to be recovery or for disposal., Batch Operation, In batch mode, the concentrate returns to the feed tank, where it mixes with the incoming feed to increase the feed tank concentration. When critical feed tank concentration is achieved, the tank contents are directed to recovery or disposal., graver(ID:8134, Mandatory Rigging Fee: $50.00)
Screw Conveyor, 8\" Diameter X 104'' Long,motor: 1.5 hp, 575 volt, 85 output rpm approx., screw dimensions: 8'' diameter x 104'' long, three 10'' ports, carbon steel contact parts, previous use: food application(ID:8460, Mandatory Rigging Fee: $50.00)
Centrifugal Pump 2.5'' x 2'', 3 HP,inlet & outlet: 2.5'' x 2'' npt fitting, stainless steel washdown motor: 3 hp, 575 volt, 3470 rpm, impeller diameter: 5'', filter interior dimensions: 10'' diameter x 36'' straight side, filter discharge: 3'' npt fitting, without filter basket, stainless steel contact parts, previous use: food application, shipping dimensions: 48'' wide x 48'' long x 66'' high, no manufacture name plate(ID:8513, Mandatory Rigging Fee: $50.00)
Roller conveyor,conveyor width: 24'', conveyor min length: 84'', conveyor max length: 271'', on casters(ID:9724, Mandatory Rigging Fee: $50.00)
Netzch Rotary Lobe Pump, Model T1-MB-1, 3 HP,manufacturer: NETZSCH, model: T1-MB-1, inlet & outlet: 7.5 in flanged reduced to 3 in cam lock fittings, motor: 3 hp, 575 volt, 1770 RPM, output rpm: 236 rpm output approx., pump is on a steel base, rubber lobes, previous use: pet food application(ID:9418, Mandatory Rigging Fee: $50.00)
20 Gallon Tank, 316l Stainless Steel, manufacturer: Walker, interior dimensions: 18'' diameter x 25'' straight side, slope bottom to end discharge: 1'', open top with lid, with bracket for clamp-on mixer, with stainless steel grab handles, tank mounted on locking casters, overall height: 49'', approximately 11 gauge stainless steel, previous use: pharmaceutical application(ID:7342, Mandatory Rigging Fee: $50.00)
20 Gallon Tank, 316L Stainless Steel, manufacturer: walker, interior dimensions: 18'' diameter x 25'' straight side, slope bottom to end discharge: 1'', open top with lid, with bracket for clamp-on mixer, with stainless steel grab handles, tank mounted on locking casters, overall height: 49'', previous use: pharmaceutical application(ID:7348, Mandatory Rigging Fee: $50.00)
5 Gallon Tank (Vessel), 316 Stainless Steel,mawp 5 psi @ 150 deg.f, dimensions: 18'' diameter x 8'' straight side, dish top & bottom, center discharge: 1.5'' tri-clamp, top inlets: two 3'', one 1.5'' tri-clamp, 10'' clamp down lid, with lifting lugs, with stainless steel grab handle, vessel mounted on locking casters, previous use: pharmaceutical application(ID:7354, Mandatory Rigging Fee: $50.00)
Mueller 10 Gallon Tank (Vessel), 316 Stainless Steel,mawp 5 psi @ 150 deg.f, dimensions: 18'' diameter x 15'' straight side, dish top & bottom, center discharge: 1.5'' tri-clamp, top inlets: two 3'', one 1.5'' tri-clamp, 10'' clamp down lid, with lifting lugs, with stainless steel grab handle, vessel mounted on locking casters, previous use: pharmaceutical application(ID:7364, Mandatory Rigging Fee: $50.00)
20 Gallon Tank, 316L Stainless Steel, manufacturer: walker, interior dimensions: 18'' diameter x 25'' straight side, slope bottom to end discharge: 1'', open top with lid, with bracket for clamp-on mixer, with stainless steel grab handles, tank mounted on locking casters, overall height: 49'', previous use: pharmaceutical application(ID:7347, Mandatory Rigging Fee: $50.00)
40 Gallon Jacketed Tank (Reactor), 316 Stainless Steel,vessel mawp: 45 psi, full vacuum @ 300 deg.f, jacket mawp: 60 psi @ 100 deg.f, dish bottom to center discharge: 1.5'' tri-clamp, top inlets: one 4'', one 2'', four 1.5'' tri-clamp, top manway with bolt down lid: 18'', interior dimensions: 19'' diameter x 32'' straight side, on four stainless steel legs with pads, with grab handle, insulated with stainless steel clad, jacket has been pressure tested(ID:7760, Mandatory Rigging Fee: $50.00)
1700 Gallon Tank, 304L Stainless Steel, API Standard 650,interior dimensions: 72'' diameter x 96'' straight side, flat top & bottom, side manway with cover: 18'', tank rated api standard 650, top ports: three 4'', two 2'', side ports: three 6'', three 4'', seven 2'', with lifting lugs, shipping information: 84'' wide x 92'' long x 108'' high @3500 LBS(ID:7389, Mandatory Rigging Fee: $50.00)
20 Gallon Tank, Stainless Steel,interior dimensions: 14'' diameter x 32'' straight side, slope bottom to end discharge: 1'' tri-clamp, open top with lid, with bracket for clamp-on mixer, with stainless steel grab handle, tank mounted on casters, previous use: pharmaceutical application(ID:8017, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 17'' Wide X 166'' Long, Pneumatic Side Shift, belt dimensions: 17'' wide x 166'' long, discharge height: 73'', infeed height with hopper: 33'', with stainless steel control panel, with belt pneumatic side shift, power requirements: 600 volt, mounted on a stainless steel frame with casters, previous use: food application(ID:7733, Mandatory Rigging Fee: $50.00)
900 Gallon Tank, Stainless Steel,interior dimensions: 56.5'' diameter x 82'' straight side, slope bottom to end discharge: 1.5'' tri-clamp, top ports: three 1.5'' tri-clamp, top manway with lid: 20'', side bolted manway cover: 45'' x 60'', with lifting lugs, mounted on four stainless steel legs, overall dimensions: 60'' x 60'' x 106'' high, previous use: food application, shipping information: 60'' wide x 108'' long x 66'' high @1200LBS(ID:7985, Mandatory Rigging Fee: $50.00)
Groen 30 Gallon Braising Pan, Stainless Steel,manufacturer: Groen, model: FPC-3, capacity: 30 gallons, power requirements: 480 volt, 3 phase, manual tilting braising pan / skillet, previous use: cosmetic application, shipping dimensions: 48'' x 60'' x 48'' high, 500 lbs(ID:8345, Mandatory Rigging Fee: $50.00)
125 Gallon Tank, 304 Stainless Steel,interior dimensions: 35.5'' diameter x 18'' straight side + 30'' cone bottom, center discharge: 7/8'' tri-clamp fitting, open top no lid, mounted on platform with casters, carbon steel legs, previous use: cosmetics application, shipping information: 48'' x 48'' x 90'', 500 lbs(ID:8350, Mandatory Rigging Fee: $50.00)
Lutetia Type 40 Vacuum Tumbler, 2200 Kg,manufacturer: Lutetia, model: type 40, capacity meat & brine: 2000, 2200 kg, capacity frozen meat: 1200 kg, power requirements: 575 volt, with control panel, weight: 1500 kg approx., previous use: meat application, *requires vacuum pump As per manufacturer: Lutetia brand tumblers improve productivity by allowing the consolidation of multiple processes. Add color, flavor, and aroma to products in one operation. Additional productivity gains can be attributed to Lutetias exclusive paddle design. This feature helps maximize homogeneity, assuring the consistency of salt, smoke and brine throughout every batch. Through Lutetias unparalleled understanding of the interactions of vacuum, temperature, mechanical action and time control. Lutetia tumblers are in applications as diverse as defrosting, rehydrating, cryogenic cooling, freezing or coating, steam or dry cooking, PROactivation, tenderizing, liquid smoke and traditional smoking, drying and more.(ID:7816, Mandatory Rigging Fee: $50.00)
Rotary Air Lock Valve, 10" X 10",inlet & outlet: 10'', housing material: carbon steel, blade material: carbon steel, motor for hazardous locations: 0.75 hp, 575 volt, 1730 rpm, output rpm: 45 approx., with stainless steel hopper, previous use: food plant(ID:8459, Mandatory Rigging Fee: $50.00)
Screw conveyor,manufacturer: MTC, model: MTCS-18-20, motor: 5 hp, 575 volt, 40 rpm aprrox, shaft diameter: 9'', previous use: food application(ID:9659, Mandatory Rigging Fee: $50.00)
Belt Conveyor, 12'' Wide X 60'' Long,manufacturer: Merrick Industries, model: 970, belt dimensions: 12'' wide x 60'' long, inlet: 10'', outlet: 9'', motor: 0.25 hp, 90 volt, 45 rpm approx., with top cover, with side plexiglass panels, stainless frame, previous use: food application, shipping information: 48'' wide x 90'' long x 50'' high, 750 lbs(ID:9401, Mandatory Rigging Fee: $50.00)
1000 Gallon Tank, 304 Stainless Steel, Insulated,Interior dimensions: 72'' diameter x 74'' straight side, Slope bottom to 2'' tri-clamp end discharge, With two CIP spray balls, With temperature probe, With mixing baffle, With agitator shaft, Insulated, Top manway with lid: 18'', Top ports: One 3'', Three 2'', One 1.5'', Top side port: 2'', Bottom ports: two 1.5'', Shipping dimensions: 7' wide x 7' long x 9' high @3500 LBS, Previous use: food application(ID:7967, Mandatory Rigging Fee: $50.00)
Powerwasher,motor: 208-230/416-460/480 volts, 1750 rpm, 20 hp, model: MPBSAP50005-5, water pressure: 5000 psi, shipping information: 48'' wide x 48'' long x 36'' high @ 500 LBS(ID:8296, Mandatory Rigging Fee: $50.00)
Demag Crane Hoists,2x DC-COM 5-500 rated for 1100 lbs and 2x DC-COM 2-250 rated for 550 lbs(ID:8299, Mandatory Rigging Fee: $50.00)
