Lot 1 is an EN BLOC offering which includes Lots 2 to 32 plus Lot 39 (Lot winner determined by greater value of the final bid between Lot 1 Complete Line VS the sum of the individual bids on Lots 2 to 32 and Lot 39). Note - Please see individual lots for complete description, etc.
Coperion 40mm MEGAcompounder Twin Screw Extruder, Type ZSK-40MC. Approximate 40 to 1 L/D ratio. Co-Rotating intermeshing side by side screw design. 10 Barrel sections consisting of (1) feed section with hopper, (4) top vented (plugged), (2) with side feeder ports. Electrically heated, water cooled with a Coperion type CU-115K closed loop cooling system. Extruder driven by a 75hp Allen-Bradley inverter duty motor thru a Flender gearbox, ratio 3.133 to 1. Approximate 44in. centerline height. Includes a manual screen changer, (1) control panel with an Allen-Bradley SLC 5/05 CPU, Eurotherm 2216e temperature controllers, Allen-Bradley 1336 Impact drive, and an Advantech operator panel. Extruder mounted on casters. Built 2000, machine# 03-3168-1000-0101, project# 03-3168.
Spare 40mm screw element for Coperion extruder
Coperion ZSB-40 Twin Screw Side Feeder. Driven by a 3hp, 3/60/230/460 volt 1765 rpm motor with a reducer. Mounted on a stand with casters. Work# 08250015, ID# 726459, ID# 03-3168-1102, built 2003. Last used with a 40mm twin screw extruder.
Zenith Gear Pump, Model 60-20000-2084-4. Capacity PEP II 100CC/revolution. Speed range 2.87 to 57.84. Driven by a 20hp, 3/60/460 volt, 1770 rpm motor with reducer. SO# 644002JM. Last used with a 40mm twin screw extruder.
Dekker DVT Vacuum Pump, Model DV0035BKA3. Driven by a 3hp, 3/60/230/460 volt, 3520 rpm motor. Includes a filter, tank, and heat exchanger. Serial# 02020271.
Coperion 25mm Twin Screw Extruder, Type ZSK-25. Approximate 40 to 1 L/D ratio. Co-Rotating intermeshing side by side screw design. 10 Barrel sections consisting of (1) feed section with hopper, (4) top vented (plugged), (2) with side feeder ports. Electrically heated, water cooled with a Coperion type CU-15K closed loop cooling system. Extruder driven by a 22kw Allen-Bradley inverter duty motor thru a PIV gearbox, ratio 2.5 to 1. Approximate 27in. centerline height. Includes (1) control panel with an Allen-Bradley SLC 5/05 CPU, Eurotherm 2216e temperature controllers, Allen-Bradley 1336 Impact drive, and an Advantech operator panel. Extruder mounted on casters. Built 2003, machine# 03-3167-1000-0101, project# 03-3167.
Spare 25mm screw element for Coperion extruder
Coperion ZSB-25 Twin Screw Side Feeder. Driven by a 3/4hp, 3/60/230/460 volt 1750 rpm motor with a reducer. Mounted on a stand with casters. Work# 06180034, ID# 717704, ID# 03-3167-1102-100, built 2003. Last used with a 25mm twin screw extruder.
Nash Elmo Vacuum Pump, Model 2BL1061-0NK03-2S. Approximate 1.85kw, serial# ER434780101014/03.
Zenith Gear Pump, Model 60-20000-2066-4. Speed range 0.06 to 59.44. Driven by a 3hp, 3/60/460 volt, 1755 rpm motor with reducer. SO# 62431943JC, built 2003. Last used with a 25mm twin screw extruder.
Davis Standard 2in. Single Screw MAC Extruder, Model 20IN20, Approximate 30 to 1 L/D ratio. Electrically heated, air cooled 4 zone non-vented barrel. Approximate 29in. centerline height, water cooled feed throat with a TSM Systems Sigmat 400 hopper. Extruder driven by a 50hp, 3/60/460 volt, 1780 rpm motor thru a gearbox, ratio 17.56 to 1. Includes a manual screen changer, control panel with Eurotherm 2216e temperature controllers, Allen-Bradley PowerFlex 700 drive, Allen-Bradley CPU. Serial# AP061, SO# 77017, Built 2003.
Davis Standard 1.25in. Single Screw Pedestal Extruder, Model KTS125, Approximate 24 to 1 L/D ratio. Electrically heated, air cooled 3 zone non-vented barrel. Manually adjustable centerline height, water cooled feed throat with hopper. Extruder driven by a 5hp, 3/60/460 volt, 1765 rpm motor thru a gearbox, ratio 15 to 1. Includes a control panel with Eurotherm 2216e temperature controllers, Allen-Bradley PowerFlex 700 drive, Allen-Bradley Panel View 600, and an Allen-Bradley Flex Logix 5434. Serial# AN843, SO# 77017, Built 2003.
Cloeren 7 Layer Selector Housing With Adapters And Panel.
Cloeren 36in. Wide Triple Manifold Die. Serial# 03-7498-1, built 2003. Includes 5 layer feed block, job# 03-7498, (4) spare internal inserts, spare lips, vacuum box with (2) blowers, and panel.
Cloeren 5 Layer Feed Block, Job# 03-7499-02.
Cloeren 48in. Wide Epoch III Die. Serial# 03-7499-7, built 2003. Includes an Autogauge with panel, fixed ? for polyester with adapter pipe, and a vacuum box.
Gala?Underwater Pelletizing System Consisting Of: (1) Gala cutting head, model SLC-6, with blades, and stand, driven by a 4kw, 3/60/230/460 volt, 3450 rpm motor. (1) Gala cutting chamber, (1) Gala spin dryer, model 2008-BF, driven by a 5hp motor, with a side mounted blower, (1) Gala agglomerate catcher, model 8.2/SG, (1) Gala 40 GPM-TWS water system with tank, pump, and heat exchanger. (1) Allen-Bradley PanelView 1000, and (1) Gala control panel with Allen-Bradley Micro Logix 1500. Serial# 10201661. ??
Davis Standard 2 Stage (9) Roll Machine Direction Orientation Machine, Serial# 60684700, Built 2003. Approximate 53in. wide. Allows a total stretch ratio of up to 16 to 1, with all rolls individually driven and heated up to 148 degrees C (300 F).?Can also be used for annealing without stretching. Consists of: (8) 6in. diameter pneumatically adjustable nip rolls, (1) 7in. diameter fixed tension roll, (3) 12in. diameter fixed cored roll, each driven by a 5hp gear motor, (1) 18in. diameter fixed cored roll driven by a 5hp gear motor, (2) 8in. diameter fixed cored roll, each driven by a 20hp gear motor, (2) 8in. diameter adjustable cored roll, each driven by a 20hp gear motor, (1) 12in. diameter adjustable cored roll driven by a 5hp gear motor. Includes a control panel with an Allen-Bradley PanelView 600, Allen-Bradley Power Flex 700 S drives, and a Budzar water skid model 8WT-3670-C/070-DSP, serial# 200308-7356.
Davis Standard Horizontal (3) Roll Sheet Stack. (3) Approximate 20in. diameter x 54in. wide chrome plated cored rolls. Each roll driven by a 5hp gear motor. Fixed center roll, end rolls pneumatically adjustable. (2) Tension rolls. Includes a control panel with Allen-Bradley controllers, Allen-Bradley PowerFlex 700 S drives, Allen-Bradley Panel View 600, (1) 54in. wide single lip air knife with blower, (1) 10in. diameter cored rubber roll, (2) spare rolls, (1) chrome, (1) matte, and approximate 8ft. long section of cooling conveyor. Serial# AP068, SO# 77017, built 2003. (1) BTU water skid model 3WT-18250-D/CSP, serial# 200304-7015.
Davis Standard Pull Roll Station. Approximate 54in. wide. (2) Pneumatically adjustable razor edge blades for edge and bleed trimming, with tension rolls. Includes a control panel with an Allen-Bradley Power Flex 700S drive. Serial# AP071, built 2003.
Davis Standard (2) Position Turret Winder. Either 3in. or 6in. diameter shafts, maximum roll diameter is 24in.. Includes a front mounted nip roll station, (2) Phoenix Designs model TW4 trim winders, control panel with Allen-Bradley Panel View 600, Allen-Bradley Power Flex 700S drives, and an Allen-Bradley controller. Serial# AP070, built 2003.
Davis Standard Unwind Station. Approximate roll capacity 54in. wide x 32in. diameter. Driven by a 2hp gear motor with air brake. Includes a Montalvo System 3000 panel. Serial# AP074, built 2003.
(2) Isseco Manufacturing Roll Transfer Carts
St-Pierre 4,000 Pound Spreader Bar. Approximate 75? wide with adjustable length hooks.
Davis Standard Unwind Station. Approximate roll capacity 54in. wide x 32in. diameter. Includes a Montalvo System 3000 panel, and an air brake. Serial# AP073, built 2003.
Wysong 52in. Wide Shear. Driven by a 5hp, 3/60/230/460 volt, 1750 rpm motor. Includes a back roller conveyor, and a control panel with Durant controller. Davis Standard serial# AR779, built 2003.
EGS Gaugings System 21 2 Head Multi-Layer Measurement and Control System Consisting Of: Mark III Industrial Scanner frame, model S-SFM10-XX, serial# 55116-2. (1) Strontium-90 gauge, serial# LK862, (1) Krypton-85 gauge.
EGS Gaugings System 21 Measurement and Control System Consisting Of: Mark III Industrial Scanner frame, model S-SFM10-XX, serial# 55116-1. (1) Krypton-85 gauge.
BST Pro Mark Randomizing Gauge Bend. Serial# 13723-1003.
Brabender Technology Feeding System Consisting Of: (1) DDW-MS6-FW80/3PLUS-200-ICS loss in weight feeder, serial# BTI0306023, (1) FW80/0PLUS-100 volumetric feeder, serial# BTI0312035, (1) FW80/3PLUS-200 volumetric feeder, serial# BTI0312034, (1) DDW-MS5-FW40/0PLUS-50-ICS loss in weight feeder, serial# BTI0306018, (1) DDW-P3-DDSR20-5-ICS loss in weight feeder, serial# BTI0306017, and (1) Brabender Congrav RC 4 panel.
Brabender Technology Feeding System Consisting Of: (2) DDW-MS5-FW40/0PLUS-50-ICS loss in weight feeder, serial# BTI0306019, BTI0306020, (1) DDW-MS5-FW40/4PLUS-50-ICS loss in weight feeder, serial# BTI0306022, (2) FW40/3PLUS-50 volumetric feeder, serial# BTI0312032, BTI0312033 and (1) Brabender Congrav RC 4 panel.
Main Control System For Lab Line.
Mezzanine for system.
Conair Vacuum Loading System, Model PD, Serial# 155983. Consisting of: (1) Sutorbilt Legend Series horizontal rotary positive displacement blower, model 34MQ-29045309, serial# S161929. Driven by a 7.5hp, 3/60/208-230/460 volt, 3500 rpm motor. (1) Silencer, (1) Conair dust collector, model DC1, serial# 156975, (1) Conair DL12, (1) DL15, (1) DL25 vacuum loaders, (1) hose distribution panel, (1) control panel.
Texas Electronics Mobil Air 1.5 Fume Collector, Serial# 38028, Built 2004. Includes a Superflex 10ft.6in. arm.
Brabender Technology Loss In Weight Feeder, Model DDW-H31-DVT120-50-ICS, Serial# BTI0306024, Built 2003.
Square D Motor Control Center.
Double E Company Manual Core Cutter, Model KGT-R. Cutting material cardboard cores with inner diameters from 1.5in. to 7.5in. and maximum core wall thickness of 0.75in.. Maximum length of cut-pats 41in.. Serial# 171/03.
Stahl Chain Hoist, Model ST10, 2200 Pound Capacity. Includes beam trolly, and control pendant. Serial# 3102870.
R-W-M Type F Hoist, 2000 Pound Capacity, Model W-2000-T1-V1. Includes beam trolly, and control pendant.
R-W-M Type F Hoist, 2000 Pound Capacity, Model W-2000-T1-V1. Includes beam trolly, and control pendant. Serial# 38455.
(4) Sections Of Pallet Racking. Not including contents.
Precision Air Convey Trim Removal System Consisting Of: Cutter, blower, chamber, panel, and miscellaneous piping.
Davis Standard Carriage With Dual Idler Rolls. Approximate 54in. Long.
Radiant Energy Systems Radiant Heaters. Consists of: (2) Model SFA heaters, approximate 54in. long, 19KW, 3/480 volts, serial# 13515, 13880. (2) Blowers, and (1) control panel with a Watlow temperature controller.
Moyno Progressive Cavity Pump, Frame 1L3, Type SST, Form CAA. Driven by a 3/4hp, 3/60/575 volt, 1725 rpm Speed-Trol variable speed motor. Base mounted. Serial# A14780.
Plafolift Andre Picard Electric Scissor Lift, 5200 Pound Capacity. Mounted on casters. Serial# SHY-45484.
Hercules Extendable Boom Attachment, 2700 Pound Capacity, Carbon Steel.
BIM Platform Scale, 5000 Pound Capacity, Model 5045. Carbon steel platform approximate 48in. x 60in., serial# 0602-17. Includes a BIM Transcell model TI-1600 digital readout, serial# 7D750910000377.
Shunde Shun 40ft. Overseas Container, Type GS40-2B, Serial# S112768.
40ft. Overseas Container, Type 1AA-DC40-12, Serial# DCMCA006827.
